Anzeige:
Ergebnis 1 bis 7 von 7

Thema: 2 Monitore, 2 Desktops,2 Maeuse

  1. #1
    Registrierter Benutzer Avatar von BOrNtOFrAg
    Registriert seit
    May 2004
    Beiträge
    119

    2 Monitore, 2 Desktops,2 Maeuse

    Moin,

    Ich beschaeftige mich den schon den ganzen Tag mit Tv-out und benutze eine Nvidia Geforce mx440.
    Bisher funktioniert alles so, dass ich auf strg-alt-F7 den normalen Desktop hab und auf strg-alt-F8 meinetwegen den mplayer mit einem Video.
    Wenn ich auf strg-alt-F8 gehe, geht der Monitor aus, wenn ich auf strg-alt-F7 gehe , geht der Monitor wieder an und der Fernseher aus.
    Ich wuenschte (wenn moeglich) , dass man gleichzeitig auf beiden Ausgabegeraeten was anderes machen koennte und zwar mit 2 verschiedenen Maeusen.
    Im Moment funktionieren die beiden Maeuse so, dass man den mauszeiger mit beiden Maeusen steuern kann.
    Tastatur hab ich nur eine , die sollte am besten auf dem normalen Monitor funktionieren..
    Ich weiss nicht wirklich , was ich zu meiner xorg adden oder veraendern soll.Das mit den 2 Maeusen is nich so wichtig, der Fernseher muss nur ne andere Xsession ausgeben als der Monitor, das waer wichtig.
    Hier is die xorg.conf:
    Code:
    # File generated by xf86config.
    
    #
    # Copyright (c) 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # 
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # 
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # 
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #
    
    # **********************************************************************
    # Refer to the XF86Config(4/5) man page for details about the format of 
    # this file.
    # **********************************************************************
    
    # NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
    # driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
    # this out to me. :)
    
    # This XF86Config file is designed for use with the VESA framebuffer.
    # This generic interface should work with nearly all video cards
    # (although not every card will support every resolution).
    
    # With the new driver, it should no longer be required to have frame buffer
    # support in the kernel, or to run it on the console.
    #
    # Enjoy! :)
    # -- volkerdi@slackware.com
    #
    
    # **********************************************************************
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #
    Section "Module"
    
    # This loads the DBE extension module.
    
        Load        "dbe"  	# Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
    #      Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    
    # This loads the font modules
        Load        "type1"
        Load        "freetype"
        Load        "speedo"
    #    Load        "v4l"
    
    # This loads the GLX module
        Load       "glx"
    
    EndSection
    
    # **********************************************************************
    # Files section.  This allows default font and rgb paths to be set
    # **********************************************************************
    
    Section "Files"
    
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
    
        RgbPath	"/usr/X11R6/lib/X11/rgb"
    
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    # 
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    # 
    
        FontPath   "/usr/X11R6/lib/X11/fonts/local/"
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath   "/usr/X11R6/lib/X11/fonts/CID/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic/"
    
    # ModulePath can be used to set a search path for the X server modules.
    # The default path is shown here.
    
    #    ModulePath "/usr/X11R6/lib/modules"
    
    EndSection
    
    # **********************************************************************
    # Server flags section.
    # **********************************************************************
    
    Section "ServerFlags"
    
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    
    #    Option     "NoTrapSignals"
    
    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12).  This allows clients to receive these key
    # events.
    
    #    Option     "DontVTSwitch"
    
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    
    #    Option     "DontZap"
    
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    
    #    Option     "DontZoom"
    
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    
    #    Option     "DisableVidModeExtension"
    
    # Uncomment this to enable the use of a non-local xvidtune client.
    
    #    Option     "AllowNonLocalXvidtune"
    
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    
    #    Option     "DisableModInDev"
    
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    
    #    Option     "AllowNonLocalModInDev"
    
    # Set the basic blanking screen saver timeout.
    
    #    Option      "blank time"    "10"    # 10 minutes
    
    # Set the DPMS timeouts.  These are set here because they are global
    # rather than screen-specific.  These settings alone don't enable DPMS.
    # It is enabled per-screen (or per-monitor), and even then only when
    # the driver supports it.
    
    #    Option      "standby time"  "20"
    #    Option      "suspend time"  "30"
    #    Option      "off time"      "60"
    
    # On some platform the server needs to estimate the sizes of PCI
    # memory and pio ranges. This is done by assuming that PCI ranges
    # don't overlap. Some broken BIOSes tend to set ranges of inactive
    # devices wrong. Here one can adjust how aggressive the assumptions
    # should be. Default is 0.
    
    # Option   "EstimateSizesAggresively" "0"
    
    EndSection
    
    # **********************************************************************
    # Input devices
    # **********************************************************************
    
    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
        Identifier	"Keyboard1"
        Driver	"Keyboard"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    
    #    Option     "Protocol"      "Xqueue"
    
    # Set the keyboard auto repeat parameters.  Not all platforms implement
    # this.
    
    #    Option     "AutoRepeat"    "500 5"
    
    # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
    
    #    Option     "Xleds" "1 2 3"
    
    # To disable the XKEYBOARD extension, uncomment XkbDisable.
    
    #    Option     "XkbDisable"
    
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a European
    # keyboard, you will probably want to use one of:
    #
    #    Option     "XkbModel"      "pc102"
    #    Option     "XkbModel"      "pc105"
    #
    # If you have a Microsoft Natural keyboard, you can use:
    #
    #    Option     "XkbModel"      "microsoft"
    #
    # If you have a US "windows" keyboard you will want:
    #
    #    Option     "XkbModel"      "pc104"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #
    #    Option     "XkbLayout"     "de"
    #
    # or:
    #
    #    Option     "XkbLayout"     "de"
    #    Option     "XkbVariant"    "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #
    #    Option     "XkbOptions"    "ctrl:swapcaps"
    
    
    # These are the default XKB settings for X.Org
    #
    #    Option     "XkbRules"      "xorg"
    #    Option     "XkbModel"      "pc101"
    #    Option     "XkbLayout"     "us"
    #    Option     "XkbVariant"    ""
    #    Option     "XkbOptions"    ""
    
    EndSection
    
    
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
    # Identifier and driver
    
        Identifier	"Mouse1"
        Driver	"mouse"
    
    # On platforms where PnP mouse detection is supported the following
    # protocol setting can be used when using a newer PnP mouse:
    
    #    Option     "Protocol"      "Auto"
    
    # The available mouse protocols types that you can set below are:
    #    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
    #    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
    #    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
    #    ThinkingMouse ThinkingMousePS/2 Xqueue
        Option "Protocol"    "ImPS/2"
        Option "ZAxisMapping" "4 5"
    # The mouse device.  The device is normally set to /dev/mouse,
    # which is usually a symbolic link to the real device.
    
        Option "Device"      "/dev/mouse"
    #    Option "Device"      "/dev/psaux"
    #   Option "Device"      "/dev/ttyS0"
    #   Option "Device"      "/dev/ttyS1"
    
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    
    #    Option "Protocol"	"Xqueue"
    
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    
    #    Option "BaudRate"		"9600"
    #    Option "SampleRate"	"150"
    
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    
    #    Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    #    Option "ChordMiddle"
    
    EndSection
    Section "InputDevice"
    Driver "mouse"
    Identifier "Mouse[2]"
    Option "Protocol" "ImPS/2"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5"
    EndSection
    # Some examples of extended input devices
    
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
    
        Identifier  "My Monitor"
    
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        HorizSync   31.5 - 50.0
    
    #    HorizSync	30-64         # multisync
    #    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
    
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        VertRefresh 40-90
    
    EndSection
    
    Section "Monitor"
      Identifier "Monitor[1]"
      ModelName "PAL TV"
      VendorName "Fernseher"
      VertRefresh 60
      HorizSync 30-50
    EndSection
    
    
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    
    # Any number of graphics device sections may be present
    
    Section "Device"
        Identifier  "VESA Framebuffer"
        Driver      "nvidia"
        Option      "NoLogo" "on"
        VideoRam    65536
        # Insert Clocks lines here if appropriate
    EndSection
    
    Section "Device"
      BoardName "GeForce-mx440"
      Driver "nvidia"
      Identifier "Device[1]"
      Screen 0
      VendorName "Nvidia"
      Option "NoLogo" "on"
      Option "TVOutFormat" "COMPOSITE"
      Option "TVStandard" "PAL-B"
      Option "ConnectedMonitor" "TV"
    EndSection
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "VESA Framebuffer"
        Monitor     "My Monitor"
    
    # If your card can handle it, a higher default color depth (like 24 or 32)
    # is highly recommended.
    
    #   DefaultDepth 8
    #   DefaultDepth 16
       DefaultDepth 24
    #   DefaultDepth 32
    
    # "1024x768" is also a conservative usable default resolution.  If you
    # have a better monitor, feel free to try resolutions such as
    # "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
    # card/monitor can produce)
    
        Subsection "Display"
            Depth       8
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
        Subsection "Display"
            Depth       32
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
    
    EndSection
    Section "Screen"
      DefaultDepth 24
      SubSection "Display"
        Depth 24
        Modes "800x600"
      EndSubSection
      Device "Device[1]"
      Identifier "TV"
      Monitor "Monitor[1]"
    EndSection
    
    
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************
    
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    
    Section "ServerLayout"
    
    # The Identifier line must be present
        Identifier  "Simple Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
    
       Screen "Screen 1"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Mouse[2]" "SendCoreEvents"
        InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    
    Section "DRI"
    Mode 0666
    EndSection
    danke im vorraus

  2. #2
    1336 - fast leet
    Registriert seit
    Apr 2004
    Ort
    Vierkirchen
    Beiträge
    433
    Da gabs glaub ich mal nen speziellen kernel dafür... mehr weiß ich nimmer, google mal.

  3. #3
    Gentoo user ;=)
    Registriert seit
    Apr 2003
    Beiträge
    371
    also ich weiss net ob dir des hilft aber ich hab des bei mir mit 2 monitoren gemacht das ich 2 verschiende x habe ... das ganze sieht so in meiner xorg.conf aus
    Code:
    Section "Device"
        Identifier "device0"
        Driver "nvidia"
        Screen 0
        BusID "PCI:1:0:0"
      # Option "ConnectedMonitor" "CRT"	
    EndSection
    
    Section "Device"
        Identifier "device1"
        Driver "nvidia"
        Screen 1
       BusID "PCI:1:0:0"
      #Option "ConnectedMonitor" "CRT"
    EndSection
    
    Section "Screen"
        Identifier "screen1"
        Device "device0"
        Monitor "Monitor0"
        DefaultColorDepth 24
    	Subsection "Display"
            	Depth 24
            	Modes "1024x768"
    	EndSubsection
    EndSection
    
    Section "Screen"
        Identifier "screen2"
        Device "device1"
        Monitor "Monitor1"    
    DefaultColorDepth 24
    	    Subsection "Display"
    		 Depth 24
            	Modes "1400x1050"
    EndSubsection
    EndSection
    des mit der option connecetmonitor musste ich raus machen weil des sonst auf den 2. moni kein bild bringt ka kann sein das des bei dir rein muss einmal mit tv und einmal mit crt (wennst röhre hast)
    zu beachten ist auch das du die richten mode lines machst für deinen tv

    und ganz am schluss ist
    Code:
    Section "ServerLayout"
        Identifier "layout1"
          InputDevice "Keyboard[0]" "CoreKeyboard"
        InputDevice "Mouse[1]" "CorePointer"
     Screen 0 "screen2"
       Screen 1 "screen1" LeftOf "screen2"
    EndSection


    und hier sind die vor allem die letzten 2 zeilen vor endsection wichtig hier gibst du an wo virtuell gesehen dein 2. monitor steht so das du mit der maus einfach nur an den jeweiligen rand deines hauptbildschirms musst um auf den 2. zu kommen ..........

    und wegen der 2 mäuse da kann ich dir leider nix dazu sagen .. aber vllt kann man in den device oder screen sections des jeweiligen monitors ne bestimmte maus zu weisen .....


    edit : ich hab grad gesehen das du des mit den devices schon hast du musst nur noch mehr des was ich am schluss habe hinzufügen und schon hast du auf beiden gleichzeitig n bild

    hierzu bekannte bugs ;

    mozilla lässt sich nur auf einem monitor starten d.h. wenn auf deinem monitor schon mal gestartet ist kannst du es auf dem tv net anschauen sondern musst erstmal den auf dem monitor killen .. man kann auch keine fenster hin und her schieben da es für x 2 getrennte xe sind .. aber ansonsten sind mir keine anderen fehler bekannt .. und des mit dem browser triit nur bei mozilla aus konqi macht des nicht .. (hab ich extra noch mal getestet ) axo und aktiv ist nur der monitor auf dem gerade die maus ist .. d.h deine tastatur eingaben sind nur auf dem moni auf dem du mit der maus bist ... wenn du des mit den 2 mäusen hinbekommen hast kannste mir mal sagen wie des geht weil des wär n1 dann könnte ich beim zoggen auch was im icq schreiben und müsst net immer das game verlassen weil ich die maus erst rüber ziehen muss

    bei der andern methode wo man fenster hin und her schieben kann haste des prob wenn du was maximierst dann hast du des auf beiden monitoren .. is sehr ätzend bei spielen vor allem wenn du so wie ich 2 verschiende monis hast und vor allem bei videos sieht des richtig bescheuert aus weil (bei mir jetzt) der 21 " n grösseres bild darstellt als der 17" und die bilder selbst wenn die monis nebeneinander stehen und angepasst werden verzerrt aussehen ...

    gibt noch die möglichkeit des clonens aber des willst du ja expliziet nicht ., (kann ich verstehen )
    Geändert von Phoenix33 (30.12.04 um 23:16 Uhr)
    Workstation: Amd 64 3000+ , 1024 mb DDR 400 , 280 gb HDD , RTL-8169 , Gentoo unstable 64bit kernel 2.6.14-gentoo-r5 Razor Coperhead Maus

    Mobil : Celeron 2,6 , 256 mb DDR 400 mhz , 40 Gb hdd, 54 Mbit Wlan , Momentan mit Windoof

  4. #4
    Registrierter Benutzer Avatar von BOrNtOFrAg
    Registriert seit
    May 2004
    Beiträge
    119
    komisch, es funktioniert nicht.
    Entweder der Bildschirm des fernsehers bleibt schwarz oder der des Moniors -.-".
    Dabei wuerd ich echt gern aufm Fernseher ein Video gucken waehrend ich quake2 spiele .
    Ich looke nochma alles durch, da stimmt mir was nich hmhm
    edit:
    jetzt geht gar nix mehr , ich nehm die xorg die ich oben hatte ^^
    merkwuerdig is aber, dass die Konsolen ausgabe immer auf beiden Monitoren , also Fernseher und monitor gleichzeitig zu sehen ist..
    Geändert von BOrNtOFrAg (31.12.04 um 01:08 Uhr)

  5. #5
    Nicht die Mama
    Registriert seit
    Aug 2003
    Ort
    Moers
    Beiträge
    46
    Hallo!

    Ich hatte dasselbe Problem mit der MX440, aber unter Windows. Da ging auch nur entweder Monitor oder Fernseher. Mit einer klassischen GeForce 2 MX konnte ich zwar Fernsehen und Monitor bedienen, aber das Bild auf dem Monitor wurde verzehrt dargestellt. Ich vermute mal, es wurde auf die PAL Auflösung angepasst, aber das ist jetzt auch egal, denn was ich eigentlich sagen wollte ist, ob man sicher sein kann, dass von der Hardware Seite auch beide Ausgänge bzw. 2 Ausgänge gleichzeitig bedient werden können.


    #matzel

  6. #6
    Registrierter Benutzer Avatar von BOrNtOFrAg
    Registriert seit
    May 2004
    Beiträge
    119
    Eigentlich muss es gehn, schliesslich habe ich die Konsolenausgabe aufm Fernseher und aufm Monitor.
    Und mein X is aus einem unerklaerlcihen Grund im Ar***.
    Ich hab die Config von oben genommen, die ich da selbst gepostet hab.Sonst habe ich an keiner Config rumgewerkelt,
    ich hab keine ahnung warum, es funktioniert nicht mehr..
    Ich installier ma die Nvidiatreiber neu, wer weiss, ich glaub
    mit dem gedanken kein quake2 zu haben koennte ich mich nich anfreunden, aber vielleicht laeufts mitter aalib .
    EDIT:
    Arbeitet nie mit diesem sch***** editor kate wenn ihr die xorg veraendert. Dieser Editor hat freundlicherweise manchmal ein paar leerzeilen vergessen zu speichern, nun X laeuft wieder .
    Geändert von BOrNtOFrAg (31.12.04 um 13:43 Uhr)

  7. #7
    Nicht die Mama
    Registriert seit
    Aug 2003
    Ort
    Moers
    Beiträge
    46
    Als ich könnte mich jetzt an dich wenden, falls ich es auch mal probieren möchte ?

Ähnliche Themen

  1. sinnvolle config für TV und 2 monitore?!
    Von thompson im Forum X-Konfiguration
    Antworten: 1
    Letzter Beitrag: 22.10.04, 21:32
  2. 2 Monitore an einem Computer
    Von mangelsdorff im Forum stationäre Hardware
    Antworten: 1
    Letzter Beitrag: 03.11.03, 02:29
  3. Monitore
    Von TuXic im Forum X-Konfiguration
    Antworten: 4
    Letzter Beitrag: 24.09.03, 15:56
  4. 2 Monitore
    Von scanio im Forum X-Konfiguration
    Antworten: 1
    Letzter Beitrag: 23.09.02, 10:20
  5. Endlich Preiswerte Flat Panel Monitore???
    Von Hotspott im Forum Linux Allgemein
    Antworten: 1
    Letzter Beitrag: 17.09.02, 00:29

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •