Anzeige:
Ergebnis 1 bis 13 von 13

Thema: Schwarzer Bildschirm nach Treiber installation

  1. #1
    Das Fragezeichen
    Registriert seit
    Aug 2003
    Ort
    Lüneburg
    Beiträge
    95

    Schwarzer Bildschirm nach Treiber installation

    Moin,
    ich habe gerade die Nvidia Treiber installliert, nur mein Prob ist das ich jetzt nicht mehr x starten kann ( => schwarzer Bildschirm)

    ich muss dazu sagen das ich den befehl export IGNORE_CC_Mismatch=yes vergessen habe, kann ich den noch irgendwie wiederholen? Zu dem waren in meine XF86Config keine Zeilen vorhanden die Load " Glore " oder Load "dri" vorhanden waren, bei denen ich nach How-To ein # vorzeichen setzen sollte.

    kann mir vielleicht einer helfen?
    habe suse 9.0

  2. #2
    Linux Versteher
    Registriert seit
    Dec 2001
    Ort
    Wuppertal
    Beiträge
    352

    Re: Schwarzer Bildschirm nach Treiber installation

    export IGNORE_CC_Mismatch=yes

    das ist nur dazu da um einen versionsconfikt deines c-compilers zu unterdrücken.
    wenn du keinen CC_MISMATCH bekommen hast, bevor du compiliert hast,
    dann ist alles ok
    um zu gucken ob der nvidia treibe läuft tippe einfach mal 'modprobe nvidia' ein.

    Load " Glore "
    Load "dri"

    die sind nicht zwingend notwendig ...
    setz einfach das load "glx" in Section "Module".

    das müsste es eigentlcih sein

    MfG SirAbdul
    Mein System:

    Athlon XP 2400+
    ASUS A7V600-X
    1024 MB DDR RAM
    GeForce 6600 GT (AGP)
    SB Live 5.1 Digital
    D-Link DFE 530 TX
    Debian testing (Kernel: 2.6.11-1-k7)
    KDE 3.3.2

  3. #3
    Das Fragezeichen
    Registriert seit
    Aug 2003
    Ort
    Lüneburg
    Beiträge
    95
    Load " glx " war auch schon in der XF86Config vorhanden, auch in Modules.
    Das hier ist die Ausgabe von modprobe nvidia:

    Warning: loading /lib/modules/2.4.21-192-default/kernel/drivers/video/nvidia.o will taint the kernel: non-GPL License - Nvidia see http://www.tux.org/lkm/#export-tainted for information about tainted modules
    Module nvidia loaded, with warnings

  4. #4
    Das Fragezeichen
    Registriert seit
    Aug 2003
    Ort
    Lüneburg
    Beiträge
    95
    kann mir niemand helfen?

  5. #5
    Suse User
    Registriert seit
    Mar 2004
    Ort
    Wetter
    Beiträge
    248
    Ich habe das gleiche Problem. Ich kriege einen kompletten X-Server Abschiss mit den neuen NVidia-Treiber... Ich muss den nv Treiber benutzen... Ich will endlich wieder ZOCKEN! :-)
    Helft uns!!!

    Amd Athlon XP 2200+
    256 DDR
    Msi Geforce 4 Ti4200
    80 GB Seagate (IDE)

    Suse 10 mit Cedega 5.0.1

    MP3 unter Suse 10: http://www.linux-club.de/viewtopic.php?p=286853

  6. #6
    Das Fragezeichen
    Registriert seit
    Aug 2003
    Ort
    Lüneburg
    Beiträge
    95
    habe eben mal den Driver namen von "nvidia" auf "NVidia" geändert.
    dann kam ein langer text, aber ich glaube den eigentlichen Fehler habe ich rausgeschrieben:

    Fatal server error:
    no screens found


    XIO: fatal IO error 104 ( Connection reset by peer ) on X Server ":0.0" after 0 requests ( 0 known processed ) with 0 events remaining.


    kann mir einer sagen was das heißt?

  7. #7
    Suse User
    Registriert seit
    Mar 2004
    Ort
    Wetter
    Beiträge
    248
    Ich glaube unser X-Server Problem wird entweder nicht für voll genommen, oder niemand weiß eine Lösung. Ich meine die Treiberinstallation an sich funktioniert ohne Probleme.
    Nur sobald man den neuen Treiber benutzen will machts: BOOOOOOM
    Schwarzer Bildschirm. Bei mit klappts nur mit dem "nv" Treiber. Bei "nvidia" stirbt alles. Bitte helft uns. :-) Wenn ich nicht bald wieder Spiele, gehe ich ein wie eine blume bei 40 Grad im Schatten

    Amd Athlon XP 2200+
    256 DDR
    Msi Geforce 4 Ti4200
    80 GB Seagate (IDE)

    Suse 10 mit Cedega 5.0.1

    MP3 unter Suse 10: http://www.linux-club.de/viewtopic.php?p=286853

  8. #8
    Registrierter Benutzer Avatar von codA
    Registriert seit
    Mar 2004
    Ort
    Home
    Beiträge
    37
    Ich hab genau das gleiche Prob....
    Wenn ich den Treiber neu installier, funktioniert es dann wieder... Ich kann alles spielen was mit opengl zu tun hat. Bis ich reboote. Dann muss ich den Drivernamen wieder auf nv setzten um den XServer zu starten.

  9. #9
    Registrierter Benutzer
    Registriert seit
    Sep 2003
    Beiträge
    483
    ist vielleicht ein schlechter Tip aber installiert den Nvidia Treiber nochmal.

    Hatte das gleiche Problem
    Treiber installiert --> X-Server wollte nicht starten
    nochmal installiert, ging wunderbar

    ansonsten kontrolliert nochmal eure XF86Config und postet sie gegebenenfalls hier, dann kann man euch evtl. besser helfen

  10. #10
    Registrierter Benutzer Avatar von codA
    Registriert seit
    Mar 2004
    Ort
    Home
    Beiträge
    37
    Öh, ja, die hab ich bereits im angehefteten Thread gepostet, aber gut:

    http://www.linuxforen.de/forums/atta...?postid=780075

  11. #11
    Registrierter Benutzer
    Registriert seit
    Sep 2003
    Beiträge
    483
    pass mal deine Section "Screen" an
    du verwendest dort anstelle von Modes den Begriff Virtual und auch keine Anführungszeichen

    Hier mal meine:

    PHP-Code:
    Section "Screen"
        
    Identifier "Screen1"
        
    Device     "Videocard1"
        
    Monitor    "Monitor1"
        
    DefaultDepth     16
        SubSection 
    "Display"
            
    Depth     16
            Modes    
    "1280x1024" "1024x786" "800x600" "640x480"
        
    EndSubSection
        SubSection 
    "Display"
            
    Depth     24
            Modes    
    "1280x1024" "1024x786" "800x600" "640x480"
        
    EndSubSection
    EndSection 

  12. #12
    Weltbürger
    Registriert seit
    Jul 2002
    Ort
    Oer-Erkenschwick
    Beiträge
    1.203
    Vielleicht noch mal zur Information. Das hat bei den meisten geklappt.
    Nvidia Installer HOWTO for SuSE Linux users
    -------------------------------------------


    This document describes how to use the new nvidia installer for the
    installation of the latest nvidia driver, which is available for your
    SuSE Linux system.

    NOTE: The nvidia installer does not work as long as a Xserver is still
    running and the nvidia kernel module is still loaded. Therefore
    please boot into runlevel 3 by specifying "3" as kernel boot
    option or switch to runlevel 3 ("init 3") and unload the kernel
    module ("rmmod nvidia") before running the nvidia installer.

    I. SuSE Linux 9.0
    II. SuSE Linux 8.2
    SuSE Linux Desktop (SLD)
    III. SuSE Linux 8.1
    United Linux 1.0 (UL1)
    SuSE Linux Enterprise Server 8 (SLES8)
    IV. SuSE Linux 8.0
    V. SuSE Linux 7.3
    SuSE Linux 7.2
    SuSE Linux Enterprise Server 7 (SLES7)
    VI. SuSE Linux 7.1
    VII. SuSE Linux 7.0 or earlier
    VIII. References
    IX. Feedback


    I. SuSE Linux 9.0
    -----------------

    It is recommended to use YOU (YaST Online Update) for (re)installation
    of the nvidia driver. There are several reasons for this. First, it's
    simple. Second, and this is the most important one, you won't need to
    recompile the nvidia kernel module after a kernel update.

    Inside YOU enable "Installable and Installed Patches" for "Show Patch
    Category" and select "Download NVIDIA(c) Graphics Driver" from the
    patches list (usually at the bottom of the list). Note, that you need
    to mark it as "Update" (right mouse click) if you already installed it
    before and the driver was uninstalled - for any reason. Proceed as
    usual now. After YOU has finished restart your Xserver (i.e. logout
    from your Xsession) and you're fine.

    People who aren't afraid of recompiling the nvidia kernel module or
    even reinstalling the nvidia driver each time the kernel has been
    updated and want or need to use the latest and greatest nvidia driver
    can use the following steps 1-3. The others should use the
    instructions above using YOU and skip the steps below.

    1) Kernel sources must be installed and configured. Usually this means
    installing the 'kernel-source' package with YaST2. Update it - if not
    already done - via YaST2 Online Update (YOU).

    2) Use the nvidia installer for 1.0-5336.

    sh NVIDIA-Linux-x86-1.0-5336-pkg1.run

    3) Configure XFree86 with

    sax2 -m 0=nvidia (0 is a digit, not a letter!)

    NOTE: There is no need to try to enable 3D support. It's already
    enabled, when the nvidia driver is running. Ignore the
    misleading error message, that 3D support can't be enabled.
    This problem will be fixed with SuSE > 9.0 and is related to the
    latest nvidia driver release.


    II. SuSE Linux 8.2
    SuSE Linux Desktop (SLD)
    ----------------------------

    1) Kernel sources must be installed and configured. Usually this means
    installing the 'kernel-source' package with YaST2, update it - if not
    already done - via YaST2 Online Update (YOU) and configure it then
    with the following commands:

    cd /usr/src/linux
    make cloneconfig && make dep

    2) Use the nvidia installer for 1.0-5336.

    sh NVIDIA-Linux-x86-1.0-5336-pkg1.run

    3) Configure XFree86 with

    sax2 -m 0=nvidia (0 is a digit, not a letter!)

    NOTE: There is no need to try to enable 3D support. It's already
    enabled, when the nvidia driver is running. Ignore the
    misleading error message, that 3D support can't be enabled.
    This problem will be fixed with SuSE > 9.0 and is related to the
    latest nvidia driver release.


    III. SuSE Linux 8.1
    United Linux 1.0 (UL1)
    SuSE Linux Enterprise Server 8 (SLES8)
    -------------------------------------------

    1) Download the according 'NVIDIA_GLX' and 'NVIDIA_kernel' RPMs for
    1.0-5336 from nvidia ftp server and install these with the following
    commands:

    rpm --justdb -Uhv NVIDIA_kernel*.rpm
    rpm -Uhv NVIDIA_GLX*.rpm

    Use "ul1" packages for UL1/SLES8.

    2) Kernel sources must be installed and configured. Usually this means
    installing the 'kernel-source' package with YaST2, update it - if not
    already done - via YaST2 Online Update (YOU) and configure it then
    with the following commands:

    cd /usr/src/linux
    make cloneconfig && make dep

    3) Download nvidia installer for 1.0-5336 and extract it with the
    following command:

    sh NVIDIA-Linux-x86-1.0-5336-pkg1.run --extract-only

    4) Compile and install the nvidia kernel module with the following
    commands:

    cd NVIDIA-Linux-x86-1.0-5336-pkg1/usr/src/nv
    make install
    depmod -a

    5) Enable 3D support with SaX2.


    IV. SuSE Linux 8.0
    ------------------

    1) Download the 'NVIDIA_GLX' and 'NVIDIA_kernel' RPMs for 1.0-5336 for
    SuSE 8.0 from nvidia ftp server and install these with the following
    commands:

    rpm --justdb -Uhv NVIDIA_kernel*.rpm
    rpm -Uhv NVIDIA_GLX*.rpm

    2) Kernel sources must be installed and configured. Usually this means
    installing the 'kernel-source' package with YaST2, update it - if not
    already done - via YaST2 Online Update (YOU) and configure it then
    with the following commands:

    cd /usr/src/linux
    make cloneconfig && make dep

    3) Download nvidia installer for 1.0-5336 and extract it with the
    following command:

    sh NVIDIA-Linux-x86-1.0-5336-pkg1.run --extract-only

    4) Compile and install the nvidia kernel module with the following
    commands:

    cd NVIDIA-Linux-x86-1.0-5336-pkg1/usr/src/nv
    make install
    depmod -a

    5) Enable 3D support with SaX2.


    V. SuSE Linux 7.3
    SuSE Linux 7.2
    SuSE Linux Enterprise Server 7 (SLES7)
    -----------------------------------------

    1) Download the 'NVIDIA_GLX' and 'NVIDIA_kernel' RPMs for 1.0-4496 for
    SuSE 7.3 from nvidia ftp server and install these with the following
    commands:

    rpm --justdb -Uhv NVIDIA_kernel*.rpm
    rpm -Uhv NVIDIA_GLX*.rpm

    2) Kernel sources must be installed and configured. Usually this means
    installing the 'kernel-source' package with YaST2, update it - if not
    already done - via YaST2 Online Update (YOU) and configure it then
    with the following commands:

    cd /usr/src/linux
    make cloneconfig && make dep

    3) Download nvidia installer for 1.0-4496 and extract it with the
    following command:

    sh NVIDIA-Linux-x86-1.0-4496-pkg2.run --extract-only

    4) Compile and install the nvidia kernel module with the following
    commands:

    cd NVIDIA-Linux-x86-1.0-4496-pkg2/usr/src/nv
    make install
    depmod -a

    5) Enable 3D support with SaX2.


    VI. SuSE Linux 7.1
    ------------------

    1) Kernel sources must be installed and configured. Usually this means
    installing the 'linux' package with YaST2, update it - if not already
    done - via YaST2 Online Update (YOU) and configure it then with the
    following commands:

    cd /usr/src/linux
    make cloneconfig && make dep

    2) Try to use the nvidia installer for 1.0-4496.

    sh NVIDIA-Linux-x86-1.0-4496-pkg2.run

    3) Enable 3D support with SaX2.


    VII. SuSE Linux 7.0 or earlier
    ------------------------------

    The nvidia driver does not work on SuSE 7.0 or earlier as the driver
    needs XFree86 4.0.1 and SuSE 7.0 comes with XFree86 4.0.


    VIII. References
    ----------------

    * nVidia driver website
    http://www.nvidia.com/view.asp?IO=li..._ia32_1.0-5336
    http://www.nvidia.com/view.asp?IO=li..._ia32_1.0-4496

    * nvidia installer
    http://download.nvidia.com/XFree86/L...-5336-pkg1.run
    http://download.nvidia.com/XFree86/L...-4496-pkg2.run

    * nvidia driver RPMs for SuSE Linux
    ftp://download.nvidia.com/XFree86/Linux-x86/1.0-5336
    ftp://download.nvidia.com/XFree86/Linux-x86/1.0-4496


    IX. Feedback
    ------------

    Please use "http://www.suse.de/feedback" for any feedback about this
    document.
    Das Vorurteil benutzt die blanke Unkenntnis als Waffe.

  13. #13
    martingraesslin
    Gast
    Hi,
    hatte genau das gleiche Problem. Hab es auf folgende Weise gelöst:

    ich habe den Installer entpackt, bin in das neu angelegte Verzeichnis gegangen und habe "make install" ausgeführt. Danach nur noch in sax2 den nvidia Treiber aktiviert. Dies hat auf den ersten Versuch geklappt.

    schöner Gruß

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •