Ich moechte die Aufloesung meines Systems aendern.
Habe KDE 3.3.
Unter 'configure dektop'---'Display'---'screen Size' kann ich nut bis 1024x768 gehen.
Wie kann ich z.B. 1600*1200 einstellen?
Druckbare Version
Ich moechte die Aufloesung meines Systems aendern.
Habe KDE 3.3.
Unter 'configure dektop'---'Display'---'screen Size' kann ich nut bis 1024x768 gehen.
Wie kann ich z.B. 1600*1200 einstellen?
Hi
Falls die Auflösung unterstützt wird, vielleicht in der Konfiguration des x-servers? I.e.: /etc/X11/XF86Config-4, /etc/X11/xorg.conf ... je nachdem welcher x-server eingesetzt wird (und kleinere Änderungen auch bei verschiedenen Distributionen, eventuell).
Welche Distribution verwendest Du? Für debian geht es z.B. auch sehr konfortabel über dpkg-reconfigure xserver-xfree86.
MfG carnil
Da stehen auch hoehere Aufloesungen drin.
Ich poste hier mal den relevanten Teil meiner XF86Config-4
Monitor:Und noch Screen:Section "Screen"Code:# Auto-generated by KNOPPIX mkxf86config
Section "Monitor"
Identifier "Monitor0"
ModelName "MAX 1b7b"
# These are the DDC-probed settings and modelines
HorizSync 30-95
VertRefresh 50-180
# 640x480, 60.0Hz; hfreq=31.469000, vfreq=59.939999
ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync
# 640x480, 72.0Hz; hfreq=37.861000, vfreq=72.808998
ModeLine "640x480" 31.50 640 656 696 816 480 481 484 504 -hsync -vsync
# 640x480, 75.0Hz; hfreq=37.500000, vfreq=75.000000
ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
# 800x600, 56.0Hz; hfreq=35.155998, vfreq=56.250000
ModeLine "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600, 60.0Hz; hfreq=37.879002, vfreq=60.317001
ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600, 72.0Hz; hfreq=48.077000, vfreq=72.188004
ModeLine "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600, 75.0Hz; hfreq=46.875000, vfreq=75.000000
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600, 75.0Hz; hfreq=46.875000, vfreq=75.000000
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600, 72.0Hz; hfreq=48.077000, vfreq=72.188004
ModeLine "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
# 1024x768, 60.0Hz; hfreq=48.362999, vfreq=60.004002
ModeLine "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768, 70.0Hz; hfreq=56.476002, vfreq=70.069000
ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768, 75.0Hz; hfreq=60.022999, vfreq=75.028999
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768, 75.0Hz; hfreq=60.022999, vfreq=75.028999
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768, 70.0Hz; hfreq=56.476002, vfreq=70.069000
ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1152x864, 75.0Hz; hfreq=67.500000, vfreq=75.000000
ModeLine "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x1024, 75.0Hz; hfreq=79.975998, vfreq=75.025002
ModeLine "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024, 75.0Hz; hfreq=79.975998, vfreq=75.025002
ModeLine "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection
Wo muss ich jetzt was aendern?Code:Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Hi
Versuche noch, die Auflösung auch in der screen-section hinzufügen. Da hier offenbar ein debian vorhanden ist (knoppix ist ja eins) einfach dpkg-reconfigure xserver-xfree86 verwenden, zuerst x-server beenden, natürlich. Anschliessend Fragen beantorten, und bei der Frage nach den gewünschten möglichen Auflösungen, auch die höreren auswählen.
hth,
MfG carnil