Blinkender Login Screen

Hallo Community,

nach dem Distributionsupdate auf OpenSuse Leap 42.3 booted das Betriebssystem nicht mehr. Der Computer fährt hoch bis zum Login Screen und da blinkt die Schrift die ganze Zeit. Man kann noch etwas eingeben aber er nimmt nicht jeden Tastenanschlag an, weshalb ich mich nicht einloggen kann, weil man das beim Passwort ja nicht sieht. Im Wiederherstellungsmodus ist es das selbe. Hat jemand eine Idee was ich da machen kann, ich bin für jede Hilfe dankbar.

EDIT: Ich habe gerade herausgefunden das das Betriebssystem mit der Kernel Version 4.4.79-18.26 noch bootet aber mit keiner anderen.

dann würde ich mit dem Kernel booten und mal in die Logs schauen.

... und evtl. noch genauer beschreiben, wie denn das Distributionsupdate auf 42.3 geschehen ist...

Welche Logs denn ? Ist das hier irgendwie hilfreich.

Code:

Feb 10 10:40:07 linux-uwqc mtp-probe[4047]: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5" Feb 10 10:40:07 linux-uwqc mtp-probe[4046]: checking bus 2, device 10: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4" Feb 10 10:40:07 linux-uwqc mtp-probe[4047]: bus: 2, device: 11 was not an MTP device Feb 10 10:40:07 linux-uwqc mtp-probe[4046]: bus: 2, device: 10 was not an MTP device Feb 10 10:40:07 linux-uwqc kernel: hid-generic 0003:046D:C06B.0007: input,hiddev0,hidraw6: USB HID v1.11 Keyboard [Logitech G700 Laser Mouse] on usb-0000:00:14.0-5/input1 Feb 10 10:40:07 linux-uwqc kernel: scsi 6:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4 Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] 3907024896 512-byte logical blocks: (2.00 TB/1.82 TiB) Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: Attached scsi generic sg5 type 0 Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] Test WP failed, assume Write Enabled Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] Asking for cache data failed Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] Assuming drive cache: write through Feb 10 10:40:07 linux-uwqc kernel: sdf: sdf1 Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] Attached SCSI disk Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00 Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 10:40:07 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00 Feb 10 10:40:07 linux-uwqc systemd[1]: Mounting /run/media/lain/16665767665746A1... Feb 10 10:40:09 linux-uwqc ntfs-3g[4111]: Version 2013.1.13 external FUSE 29 Feb 10 10:40:09 linux-uwqc ntfs-3g[4111]: Mounted /dev/sdf1 (Read-Write, label "", NTFS 3.1) Feb 10 10:40:09 linux-uwqc ntfs-3g[4111]: Cmdline options: rw,default Feb 10 10:40:09 linux-uwqc ntfs-3g[4111]: Mount options: rw,default,allow_other,nonempty,relatime,fsname=/dev/sdf1,blkdev,blksize=4096 Feb 10 10:40:09 linux-uwqc ntfs-3g[4111]: Ownership and permissions disabled, configuration type 1 Feb 10 10:40:09 linux-uwqc systemd[1]: Mounted /run/media/lain/16665767665746A1. Feb 10 10:42:33 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=80.211.162.57 DST=192.168.180.21 LEN=44 TOS=0x00 PREC=0x00 TTL=247 ID=54321 PROTO=TCP SPT=47025 DPT=22 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405AC) Feb 10 10:43:34 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=192.168.180.1 DST=192.168.180.21 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=29508 DF PROTO=TCP SPT=44835 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402 Feb 10 10:44:21 linux-uwqc kernel: SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=192.168.180.1 DST=192.168.180.21 LEN=203 TOS=0x00 PREC=0xC0 TTL=64 ID=7447 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.180.21 DST=172.217.23.68 LEN=175 TOS=0 Feb 10 10:45:01 linux-uwqc cron[4316]: pam_unix(crond:session): session opened for user root by (uid=0) Feb 10 10:45:01 linux-uwqc systemd[1]: Created slice User Slice of root. Feb 10 10:45:01 linux-uwqc systemd[1]: Starting User Manager for UID 0... Feb 10 10:45:01 linux-uwqc systemd[1]: Started Session 3 of user root. Feb 10 10:45:01 linux-uwqc systemd[4317]: pam_unix(systemd-user:session): session opened for user root by (uid=0) Feb 10 10:45:01 linux-uwqc systemd[4317]: Reached target Sockets. Feb 10 10:45:01 linux-uwqc systemd[4317]: Reached target Timers. Feb 10 10:45:01 linux-uwqc systemd[4317]: Reached target Paths. Feb 10 10:45:01 linux-uwqc systemd[4317]: Reached target Basic System. Feb 10 10:45:01 linux-uwqc systemd[4317]: Reached target Default. Feb 10 10:45:01 linux-uwqc systemd[4317]: Startup finished in 18ms. Feb 10 10:45:01 linux-uwqc systemd[1]: Started User Manager for UID 0. Feb 10 10:45:01 linux-uwqc CRON[4316]: pam_unix(crond:session): session closed for user root Feb 10 10:45:01 linux-uwqc systemd[1]: Stopping User Manager for UID 0... Feb 10 10:45:01 linux-uwqc systemd[4317]: Reached target Shutdown. Feb 10 10:45:01 linux-uwqc systemd[4317]: Stopped target Default. Feb 10 10:45:01 linux-uwqc systemd[4317]: Starting Exit the Session... Feb 10 10:45:01 linux-uwqc systemd[4317]: Stopped target Basic System. Feb 10 10:45:01 linux-uwqc systemd[4317]: Stopped target Paths. Feb 10 10:45:01 linux-uwqc systemd[4317]: Stopped target Timers. Feb 10 10:45:01 linux-uwqc systemd[4317]: Stopped target Sockets. Feb 10 10:45:01 linux-uwqc systemd[4317]: Received SIGRTMIN+24 from PID 4356 (kill). Feb 10 10:45:01 linux-uwqc systemd[4321]: pam_unix(systemd-user:session): session closed for user root Feb 10 10:45:01 linux-uwqc systemd[1]: Stopped User Manager for UID 0. Feb 10 10:45:01 linux-uwqc systemd[1]: Removed slice User Slice of root. Feb 10 10:47:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 10:47:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 10:47:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 10:47:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00 Feb 10 10:47:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 10:47:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 10:47:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 10:47:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00 Feb 10 10:48:47 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=192.168.180.1 DST=192.168.180.21 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=13773 DF PROTO=TCP SPT=49304 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402 Feb 10 10:52:29 linux-uwqc systemd[1]: Starting Cleanup of Temporary Directories... Feb 10 10:52:29 linux-uwqc systemd[1]: Started Cleanup of Temporary Directories. Feb 10 10:53:03 linux-uwqc pulseaudio[3588]: [alsa-sink-CMI8738-MC6] alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write. Feb 10 10:53:03 linux-uwqc pulseaudio[3588]: [alsa-sink-CMI8738-MC6] alsa-sink.c: Most likely this is a bug in the ALSA driver 'snd_cmipci'. Please report this issue to the ALSA developers. Feb 10 10:53:03 linux-uwqc pulseaudio[3588]: [alsa-sink-CMI8738-MC6] alsa-sink.c: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail. Feb 10 10:53:07 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=62.233.65.182 DST=192.168.180.21 LEN=44 TOS=0x00 PREC=0x00 TTL=248 ID=60191 DF PROTO=TCP SPT=107 DPT=443 WINDOW=512 RES=0x00 SYN URGP=0 OPT (020405AC) Feb 10 10:53:16 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=77.245.1.28 DST=192.168.180.21 LEN=44 TOS=0x00 PREC=0x00 TTL=53 ID=7673 PROTO=TCP SPT=45706 DPT=22 WINDOW=38570 RES=0x00 SYN URGP=0 OPT (020405AC) Feb 10 10:53:16 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=77.245.1.28 DST=192.168.180.21 LEN=60 TOS=0x00 PREC=0x00 TTL=53 ID=54319 DF PROTO=TCP SPT=54497 DPT=22 WINDOW=14600 RES=0x00 SYN URGP=0 OPT (020405AC04020 Feb 10 10:53:17 linux-uwqc sshd[4430]: Invalid user service from 77.245.1.28 Feb 10 10:53:17 linux-uwqc sshd[4430]: input_userauth_request: invalid user service [preauth] Feb 10 10:53:17 linux-uwqc sshd[4430]: error: maximum authentication attempts exceeded for invalid user service from 77.245.1.28 port 54497 ssh2 [preauth] Feb 10 10:53:17 linux-uwqc sshd[4430]: Disconnecting: Too many authentication failures [preauth] Feb 10 10:54:49 linux-uwqc su[4494]: (to root) lain on pts/0 Feb 10 10:54:49 linux-uwqc su[4494]: pam_unix(su:session): session opened for user root by lain(uid=1000) Feb 10 10:54:49 linux-uwqc su[4494]: pam_systemd(su:session): Cannot create session: Already running in a session Feb 10 10:55:26 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=31.130.9.51 DST=192.168.180.21 LEN=44 TOS=0x00 PREC=0x00 TTL=55 ID=60256 PROTO=TCP SPT=21753 DPT=22 WINDOW=21937 RES=0x00 SYN URGP=0 OPT (0204058C) Feb 10 10:55:27 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=31.130.9.51 DST=192.168.180.21 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=1217 PROTO=TCP SPT=55999 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (0204058C0402080A0D Feb 10 10:55:28 linux-uwqc sshd[4524]: error: maximum authentication attempts exceeded for root from 31.130.9.51 port 55999 ssh2 [preauth] Feb 10 10:55:28 linux-uwqc sshd[4524]: Disconnecting: Too many authentication failures [preauth] Feb 10 10:57:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 10:57:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 10:57:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 10:57:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00 Feb 10 10:57:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 10:57:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 10:57:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 10:57:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00 Feb 10 10:58:06 linux-uwqc su[4571]: (to root) lain on pts/3 Feb 10 10:58:06 linux-uwqc su[4571]: pam_unix(su:session): session opened for user root by (uid=1000) Feb 10 10:58:06 linux-uwqc su[4571]: pam_systemd(su:session): Cannot create session: Already running in a session Feb 10 10:58:06 linux-uwqc su[4571]: pam_unix(su:session): session closed for user root Feb 10 10:58:07 linux-uwqc su[4576]: (to root) lain on pts/3 Feb 10 10:58:07 linux-uwqc su[4576]: pam_unix(su:session): session opened for user root by (uid=1000) Feb 10 10:58:07 linux-uwqc su[4576]: pam_systemd(su:session): Cannot create session: Already running in a session Feb 10 10:58:08 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=173.255.244.48 DST=192.168.180.21 LEN=44 TOS=0x00 PREC=0x00 TTL=247 ID=54321 PROTO=TCP SPT=35725 DPT=443 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405AC) Feb 10 10:58:13 linux-uwqc dbus[1724]: [system] Activating service name='org.opensuse.Snapper' (using servicehelper) Feb 10 10:58:13 linux-uwqc dbus[1724]: [system] Successfully activated service 'org.opensuse.Snapper' Feb 10 11:00:01 linux-uwqc cron[5428]: pam_unix(crond:session): session opened for user root by (uid=0) Feb 10 11:00:01 linux-uwqc systemd[1]: Created slice User Slice of root. Feb 10 11:00:01 linux-uwqc systemd[1]: Starting User Manager for UID 0... Feb 10 11:00:01 linux-uwqc systemd[1]: Started Session 4 of user root. Feb 10 11:00:01 linux-uwqc systemd[5429]: pam_unix(systemd-user:session): session opened for user root by (uid=0) Feb 10 11:00:01 linux-uwqc systemd[5429]: Reached target Timers. Feb 10 11:00:01 linux-uwqc systemd[5429]: Reached target Paths. Feb 10 11:00:01 linux-uwqc systemd[5429]: Reached target Sockets. Feb 10 11:00:01 linux-uwqc systemd[5429]: Reached target Basic System. Feb 10 11:00:01 linux-uwqc systemd[5429]: Reached target Default. Feb 10 11:00:01 linux-uwqc systemd[5429]: Startup finished in 18ms. Feb 10 11:00:01 linux-uwqc systemd[1]: Started User Manager for UID 0. Feb 10 11:00:01 linux-uwqc CRON[5428]: pam_unix(crond:session): session closed for user root Feb 10 11:00:01 linux-uwqc systemd[1]: Stopping User Manager for UID 0... Feb 10 11:00:01 linux-uwqc systemd[5429]: Stopped target Default. Feb 10 11:00:01 linux-uwqc systemd[5429]: Stopped target Basic System. Feb 10 11:00:01 linux-uwqc systemd[5429]: Stopped target Sockets. Feb 10 11:00:01 linux-uwqc systemd[5429]: Stopped target Timers. Feb 10 11:00:01 linux-uwqc systemd[5429]: Stopped target Paths. Feb 10 11:00:01 linux-uwqc systemd[5429]: Reached target Shutdown. Feb 10 11:00:01 linux-uwqc systemd[5429]: Starting Exit the Session... Feb 10 11:00:01 linux-uwqc systemd[5429]: Received SIGRTMIN+24 from PID 5467 (kill). Feb 10 11:00:01 linux-uwqc systemd[5433]: pam_unix(systemd-user:session): session closed for user root Feb 10 11:00:01 linux-uwqc systemd[1]: Stopped User Manager for UID 0. Feb 10 11:00:01 linux-uwqc systemd[1]: Removed slice User Slice of root. Feb 10 11:00:34 linux-uwqc dbus[1724]: [system] Activating service name='org.opensuse.Snapper' (using servicehelper) Feb 10 11:00:34 linux-uwqc dbus[1724]: [system] Successfully activated service 'org.opensuse.Snapper' Feb 10 11:06:56 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=103.207.37.135 DST=192.168.180.21 LEN=44 TOS=0x00 PREC=0x00 TTL=243 ID=43250 PROTO=TCP SPT=55513 DPT=22 WINDOW=1024 RES=0x00 SYN URGP=0 OPT (020405AC) Feb 10 11:07:30 linux-uwqc smartd[1749]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 111 to 110 Feb 10 11:07:31 linux-uwqc smartd[1749]: Device: /dev/sdd [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 110 to 112 Feb 10 11:07:32 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 11:07:32 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 11:07:32 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 11:07:32 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 Feb 10 11:07:32 linux-uwqc smartd[1749]: Device: /dev/sdf [SAT], 1 Currently unreadable (pending) sectors Feb 10 11:07:32 linux-uwqc smartd[1749]: Device: /dev/sdf [SAT], 1 Offline uncorrectable sectors Feb 10 11:07:32 linux-uwqc smartd[1749]: Device: /dev/sdf [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 113 to 112 Feb 10 11:07:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 11:07:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 11:07:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 11:07:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00 Feb 10 11:07:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 11:07:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 11:07:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 11:07:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00 Feb 10 11:15:01 linux-uwqc cron[8049]: pam_unix(crond:session): session opened for user root by (uid=0) Feb 10 11:15:01 linux-uwqc systemd[1]: Created slice User Slice of root. Feb 10 11:15:01 linux-uwqc systemd[1]: Starting User Manager for UID 0... Feb 10 11:15:01 linux-uwqc systemd[1]: Started Session 5 of user root. Feb 10 11:15:01 linux-uwqc systemd[8050]: pam_unix(systemd-user:session): session opened for user root by (uid=0) Feb 10 11:15:01 linux-uwqc systemd[8050]: Reached target Sockets. Feb 10 11:15:01 linux-uwqc systemd[8050]: Reached target Timers. Feb 10 11:15:01 linux-uwqc systemd[8050]: Reached target Paths. Feb 10 11:15:01 linux-uwqc systemd[8050]: Reached target Basic System. Feb 10 11:15:01 linux-uwqc systemd[8050]: Reached target Default. Feb 10 11:15:01 linux-uwqc systemd[8050]: Startup finished in 18ms. Feb 10 11:15:01 linux-uwqc systemd[1]: Started User Manager for UID 0. Feb 10 11:15:01 linux-uwqc CRON[8049]: pam_unix(crond:session): session closed for user root Feb 10 11:15:01 linux-uwqc systemd[1]: Stopping User Manager for UID 0... Feb 10 11:15:01 linux-uwqc systemd[8050]: Reached target Shutdown. Feb 10 11:15:01 linux-uwqc systemd[8050]: Starting Exit the Session... Feb 10 11:15:01 linux-uwqc systemd[8050]: Stopped target Default. Feb 10 11:15:01 linux-uwqc systemd[8050]: Stopped target Basic System. Feb 10 11:15:01 linux-uwqc systemd[8050]: Stopped target Paths. Feb 10 11:15:01 linux-uwqc systemd[8050]: Stopped target Timers. Feb 10 11:15:01 linux-uwqc systemd[8050]: Stopped target Sockets. Feb 10 11:15:01 linux-uwqc systemd[8050]: Received SIGRTMIN+24 from PID 8089 (kill). Feb 10 11:15:01 linux-uwqc systemd[8055]: pam_unix(systemd-user:session): session closed for user root Feb 10 11:15:01 linux-uwqc systemd[1]: Stopped User Manager for UID 0. Feb 10 11:15:01 linux-uwqc systemd[1]: Removed slice User Slice of root. Feb 10 11:18:02 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 11:18:02 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 11:18:02 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 11:18:02 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00 Feb 10 11:18:02 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 11:18:02 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 11:18:02 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 11:18:02 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00 Feb 10 11:20:29 linux-uwqc dbus[1724]: [system] Activating service name='org.opensuse.Snapper' (using servicehelper) Feb 10 11:20:29 linux-uwqc dbus[1724]: [system] Successfully activated service 'org.opensuse.Snapper' Feb 10 11:27:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 11:27:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 11:27:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 11:27:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00 Feb 10 11:27:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 11:27:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 11:27:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 11:27:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00 Feb 10 11:30:01 linux-uwqc cron[9101]: pam_unix(crond:session): session opened for user root by (uid=0) Feb 10 11:30:01 linux-uwqc systemd[1]: Created slice User Slice of root. Feb 10 11:30:01 linux-uwqc systemd[1]: Starting User Manager for UID 0... Feb 10 11:30:01 linux-uwqc systemd[1]: Started Session 6 of user root. Feb 10 11:30:01 linux-uwqc systemd[9102]: pam_unix(systemd-user:session): session opened for user root by (uid=0) Feb 10 11:30:01 linux-uwqc systemd[9102]: Reached target Paths. Feb 10 11:30:01 linux-uwqc systemd[9102]: Reached target Sockets. Feb 10 11:30:01 linux-uwqc systemd[9102]: Reached target Timers. Feb 10 11:30:01 linux-uwqc systemd[9102]: Reached target Basic System. Feb 10 11:30:01 linux-uwqc systemd[9102]: Reached target Default. Feb 10 11:30:01 linux-uwqc systemd[9102]: Startup finished in 20ms. Feb 10 11:30:01 linux-uwqc systemd[1]: Started User Manager for UID 0. Feb 10 11:30:02 linux-uwqc CRON[9101]: pam_unix(crond:session): session closed for user root Feb 10 11:30:02 linux-uwqc systemd[1]: Stopping User Manager for UID 0... Feb 10 11:30:02 linux-uwqc systemd[9102]: Reached target Shutdown. Feb 10 11:30:02 linux-uwqc systemd[9102]: Stopped target Default. Feb 10 11:30:02 linux-uwqc systemd[9102]: Starting Exit the Session... Feb 10 11:30:02 linux-uwqc systemd[9102]: Stopped target Basic System. Feb 10 11:30:02 linux-uwqc systemd[9102]: Stopped target Sockets. Feb 10 11:30:02 linux-uwqc systemd[9102]: Stopped target Paths. Feb 10 11:30:02 linux-uwqc systemd[9102]: Stopped target Timers. Feb 10 11:30:02 linux-uwqc systemd[9102]: Received SIGRTMIN+24 from PID 9151 (kill). Feb 10 11:30:02 linux-uwqc systemd[9107]: pam_unix(systemd-user:session): session closed for user root Feb 10 11:30:02 linux-uwqc systemd[1]: Stopped User Manager for UID 0. Feb 10 11:30:02 linux-uwqc systemd[1]: Removed slice User Slice of root. Feb 10 11:34:45 linux-uwqc dbus[1724]: [system] Activating service name='org.opensuse.Snapper' (using servicehelper) Feb 10 11:34:45 linux-uwqc dbus[1724]: [system] Successfully activated service 'org.opensuse.Snapper' Feb 10 11:35:48 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=223.241.220.84 DST=192.168.180.21 LEN=44 TOS=0x00 PREC=0x00 TTL=54 ID=17784 PROTO=TCP SPT=56076 DPT=22 WINDOW=63012 RES=0x00 SYN URGP=0 OPT (020405AC) Feb 10 11:35:48 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=223.241.220.84 DST=192.168.180.21 LEN=60 TOS=0x00 PREC=0x00 TTL=54 ID=42611 DF PROTO=TCP SPT=43187 DPT=22 WINDOW=29200 RES=0x00 SYN URGP=0 OPT (020405AC04 Feb 10 11:35:53 linux-uwqc sshd[10083]: error: maximum authentication attempts exceeded for root from 223.241.220.84 port 43187 ssh2 [preauth] Feb 10 11:35:53 linux-uwqc sshd[10083]: Disconnecting: Too many authentication failures [preauth] Feb 10 11:36:53 linux-uwqc kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=74:d0:2b:7d:b9:49:34:31:c4:6a:d7:a8:08:00 SRC=115.23.187.69 DST=192.168.180.21 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=65364 PROTO=TCP SPT=481 DPT=22 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405AC0101040 Feb 10 11:37:32 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 11:37:32 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 11:37:32 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 11:37:32 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 Feb 10 11:37:32 linux-uwqc smartd[1749]: Device: /dev/sdf [SAT], 1 Currently unreadable (pending) sectors Feb 10 11:37:32 linux-uwqc smartd[1749]: Device: /dev/sdf [SAT], 1 Offline uncorrectable sectors Feb 10 11:37:32 linux-uwqc smartd[1749]: Device: /dev/sdf [SAT], SMART Prefailure Attribute: 3 Spin_Up_Time changed from 253 to 241 Feb 10 11:37:32 linux-uwqc smartd[1749]: Device: /dev/sdf [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 112 to 114 Feb 10 11:37:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 11:37:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 11:37:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 11:37:54 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00 Feb 10 11:37:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Feb 10 11:37:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Feb 10 11:37:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Feb 10 11:37:55 linux-uwqc kernel: sd 6:0:0:0: [sdf] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00

Das Upgrade habe ich über zypper durchgeführt, also die neuen Repositorys hinzugefügt und dann ein Update gemacht.

Könnte es sein, dass Du einen Original-NVIDIA-Treiber installiert hast?

Also ich habe den G04 Treiber über die Nvidia Repositorys installiert. Warum ?

Poste:

Code:

zypper lr -d

Hast du einen Netzwerkverbindung?
Was sagt:

Code:

zypper dup

Zitat:

Zitat von DonnieDarko

Also ich habe den G04 Treiber über die Nvidia Repositorys installiert. Warum ?

Weil ich das Symptom kenne. Ich habe es dadurch bekämpft, dass ich mich remote auf diesen Rechner geschaltet habe und den neuesten NVIDIA-Treiber von deren Homepage installiert habe. Dazu muss aber in Yast das NVIDIA-Repository deaktiviert werden, sonst bügelt das nächste Update wieder den alten Treiber drüber.

zypper lr -d

Code:

Repository-Prioritäten treten in Kraft: (Siehe 'zypper lr -P' für Details) 99 (Standard-Priorität) : 9 Repositorys 103 (gesenkte Priorität) : 1 Repository # | Alias | Name | Aktiviert | GPG-Überprüfung | Aktualisierung | Priorität | Typ | URI | Dienst ---+-------------------------------------+-----------------------------------------+-----------+-----------------+----------------+-----------+--------+--------------------------------------------------------------------------------------+------- 1 | http-download.nvidia.com-7b33a191 | nVidia Graphics Drivers | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.nvidia.com/opensuse/leap/42.3 | 2 | http-download.opensuse.org-28674dea | devel:tools:compiler | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.opensuse.org/repositories/devel:/tools:/compiler/openSUSE_Leap_42.3/ | 3 | http-download.opensuse.org-2ab1b656 | devel:tools:compiler | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.opensuse.org/repositories/devel:/tools:/compiler/openSUSE_Leap_42.3/ | 4 | http-download.opensuse.org-6e2e21aa | games:tools | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.opensuse.org/repositories/games:/tools/openSUSE_Leap_42.3/ | 5 | http-download.opensuse.org-a835230e | home:so_it_team | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.opensuse.org/repositories/home:/so_it_team/openSUSE_Leap_42.3/ | 6 | http-download.opensuse.org-b55c3dbf | openSUSE:Leap:42.3:Update | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.opensuse.org/repositories/openSUSE:/Leap:/42.3:/Update/standard/ | 7 | http-opensuse-guide.org-62b951e8 | libdvdcss repository | Ja | (r ) Ja | Ja | 99 | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_42.3/ | 8 | http-packman.inode.at-8d1a8249 | Packman Repository | Ja | (r ) Ja | Ja | 103 | rpm-md | http://packman.inode.at/suse/openSUSE_Leap_42.3/ | 9 | openSUSE-42.2-0 | openSUSE-42.2-0 | Nein | ---- | ---- | 99 | yast2 | cd:///?devices=/dev/disk/by-id/ata-HL-DT-ST_BD-RE_BH10LS30_K9LB5E40500 | 10 | repo-debug | openSUSE-Leap-42.2-Debug | Nein | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/distribution/leap/42.2/repo/oss/ | 11 | repo-debug-non-oss | openSUSE-Leap-42.2-Debug-Non-Oss | Nein | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/distribution/leap/42.2/repo/non-oss/ | 12 | repo-debug-update | openSUSE-Leap-42.2-Update-Debug | Nein | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/update/leap/42.2/oss/ | 13 | repo-debug-update-non-oss | openSUSE-Leap-42.2-Update-Debug-Non-Oss | Nein | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/update/leap/42.2/non-oss/ | 14 | repo-non-oss | openSUSE-Leap-42.2-Non-Oss | Nein | ---- | ---- | 99 | yast2 | http://download.opensuse.org/distribution/leap/42.2/repo/non-oss/ | 15 | repo-oss | openSUSE-Leap-42.3-Oss | Ja | (r ) Ja | Ja | 99 | yast2 | http://download.opensuse.org/distribution/leap/42.3/repo/oss/ | 16 | repo-source | openSUSE-Leap-42.2-Source | Nein | ---- | ---- | 99 | NONE | http://download.opensuse.org/source/distribution/leap/42.2/repo/oss/ | 17 | repo-source-non-oss | openSUSE-Leap-42.2-Source-Non-Oss | Nein | ---- | ---- | 99 | NONE | http://download.opensuse.org/source/distribution/leap/42.2/repo/non-oss/ | 18 | repo-update | openSUSE-Leap-42.3-Update | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.opensuse.org/update/leap/42.3/oss/ | 19 | repo-update-non-oss | openSUSE-Leap-42.2-Update-Non-Oss | Nein | ---- | ---- | 99 | rpm-md | http://download.opensuse.org/update/leap/42.2/non-oss/

Hier die Repositorys die sind doch in Ordnung so oder ? Ich habe das zypper dup ausgeführt und der hat ein paar Packete gedowngraded darunter auch der Grafikkartentreiber und jetzt geht alles, so einfach vielen vielen dank. Ich verstehe zwar nicht wieso der da was downgraden anstatt upgraden muss aber Hauptsache es geht.

Zitat:

Ich verstehe zwar nicht wieso der da was downgraden anstatt upgraden muss aber Hauptsache es geht.

Das kommt darauf an, ob die Versionen/Release unter Leap42.3 eine höhere oder niedrigere Nummer haben. Das kann schon sein.

Übrigens sollte man das Upgrade nur mir den 4 offiziellen Repos machen, evtl. noch mit dem Packman Repo.
Ich würde auch vorher den Nvidia Treiber deinstallieren, das Repo deaktivieren und vor dem Upgrade neu starten.

Ich mache übrigens immer einen Neuinstallation unter Beibehaltung des alten /home.
Das funktioniert immer.