Option "TVOverScan"?

[ChandlerBing]

hi,

ich versuche mit den nvidia 4349 Treiber unter redhat 9 den overscan mode für meinen TV-out zu aktivieren, aber es gelingt mir nicht. Die Größe des Bilds bleibt unverändert, egal welchen Wert ich einstelle.
Es soll doch in der screen section stehen, oder?

Anbei mal meine XF86Config

Danke,
Chandler

------------------
# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
# Load "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Unprobed Monitor"
HorizSync 30 - 50
VertRefresh 60
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Nvidia"
BoardName "NVIDIA GeForce 4 MX (generic)"
VideoRam 65536
Option "TVOutFormat" "S-VIDEO"
Option "TVStandart" "PAL-G"
Option "ConnectedMonitor" "TV"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Option "TVStandart" "PAL-G"
Option "TVOverScan" "1.0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

[Ygriega]

Nach meinen Informationen muss die Option Overscan in die Section "Device".

[ChandlerBing]

Wenn ich es in die Device Section eintrage, dann funzt es leider auch nicht.
Was kann das sein?

Danke,

Chandler

[ChandlerBing]

Könnte evtl jemand seine XF86Config posten bei dem es funktioniert?
Oder benutzt hier niemand das Overscan?

Chandler

[Fragger]

Der Treiber unterstützt nur Overscan auf GF4 GPUs mit NVIDIA oder Conexant TV-Encoder Chips...

Vielleicht hast du nen Philips???

Ich such gerade nach ner Karte (GF4 TI4xxx) mit Conexant-Chip? Kennt da jemand eine?
Meine Albatron GF4 TI4600 hab ich heute, nachdem sie den Geist aufgegeben hatte, zurückgebracht und jetzt brauch ich was neues...

[MiGo]

Versuch' doch mal YANC YetAnotherNvConfigurator (http://yanc.sourceforge.net/index-en.html),
vielleicht hilft der weiter.
Viel Glück
MiGo

[Ygriega]

YanC kann dir da momentan leider auch nicht weiterhelfen.

Die Option "TVOverscan" hab ich leider noch nicht implementiert. (Leide momentan unter aktutem Zeitmangel) Aber selbst wenn die Option drinne wäre, würde die auch nur mit nVidia und Connexant-Encodern funktionieren, da YanC "nur" die Optionen in die XF86Config einträgt.