20.10.00, 09:55
Hallo alleseitz,
ich hab da ein kleines Problem was mir ordentlich zu schaffen macht. So langsam glaube ich das ich so richtig "meschugge" bin http://www.linuxforen.de/ubb/smile.gif
Die Fakten:
Habe Suse 6.2 installiert
ISDN von ITK Columbus World / ISA Steckplatz
laut meinen Ermittlungen:
IRQ=11
Port=0x390
ISAC=0x6000
HSCX=0x6040
das Ding will ich installieren aber immer wieder Fehlermeldungen ohne Ende, anbei ein paar Daten aus meiner /var/messages:
Oct 20 10:10:51 esma kernel: CSLIP: code copyright 1989 Regents of the Universit
Oct 20 10:10:51 esma kernel: ISDN subsystem Rev: 1.83/1.68/1.88/1.49/1.14/1.2 l
Oct 20 10:10:51 esma kernel: HiSax: Linux Driver for passive ISDN cards
Oct 20 10:10:51 esma kernel: HiSax: Version 3.2a (module)
Oct 20 10:10:51 esma kernel: HiSax: Layer1 Revision 2.34
Oct 20 10:10:51 esma kernel: HiSax: Layer2 Revision 2.17
Oct 20 10:10:51 esma kernel: HiSax: TeiMgr Revision 2.12
Oct 20 10:10:51 esma kernel: HiSax: Layer3 Revision 2.9
Oct 20 10:10:51 esma kernel: HiSax: LinkLayer Revision 2.29
Oct 20 10:10:51 esma kernel: HiSax: Approval certification failed because of
Oct 20 10:10:51 esma kernel: HiSax: unauthorized source code changes
Oct 20 10:10:51 esma kernel: HiSax: Total 1 card defined
Oct 20 10:10:51 esma kernel: HiSax: Card 1 Protocol EDSS1 Id=ITK (0)
Oct 20 10:10:51 esma kernel: HiSax: ITK IX1 driver Rev. 2.8
Oct 20 10:10:51 esma kernel: HiSax: ITK ix1-micro Rev.2 config irq:11 io:0x390
Oct 20 10:10:51 esma kernel: ix1-Micro: ISAC version (0): 2086/2186 V1.1
Oct 20 10:10:51 esma kernel: ix1-Micro: HSCX version A: V2.1 B: V2.1
Oct 20 10:10:51 esma kernel: ITK ix1-micro Rev.2: IRQ 11 count 67
Oct 20 10:10:51 esma kernel: ITK ix1-micro Rev.2: IRQ 11 count 72
Oct 20 10:10:51 esma kernel: HiSax: DSS1 Rev. 2.14
Oct 20 10:10:51 esma kernel: HiSax: 2 channels added
Oct 20 10:10:51 esma kernel: HiSax: MAX_WAITING_CALLS added
Oct 20 10:10:51 esma kernel: isdn: Verbose-Level is 3
Oct 20 10:10:51 esma isdnlog: isdnlog Version 3.41 starting
Oct 20 10:10:51 esma isdnlog: Warning: no holiday database specified!
Oct 20 10:10:51 esma isdnlog: Warning: no country database specified!
Oct 20 10:10:51 esma isdnlog: Warning: no rate database specified!
Oct 20 10:10:51 esma isdnlog: (ISDN subsystem with ISDN_MAX_CHANNELS > 16 detect
Oct 20 10:10:51 esma isdnlog: (Data versions: iprofd=0x05 net_cfg=0x05 /dev/is
und dann noch was ich so in der Konsole alles fabriziere:
root@esma:~ > isapnp /etc/isapnp.conf
Board 1 has Identity 6d ff ff ff ff f0 00 8c 0e: CTL00f0 Serial No -1 [checksum 6d]
Board 2 has Identity 96 c4 89 9b 0c 29 00 8b 26: ITK0029 Serial No 3297352460 [checksum 96]
CTL00f0/-1[0]{Audio }: IRQ5 --- Enabled OK
ITK0029/3297352460[0]{Columbus Card }: IRQ11 --- Enabled OK
root@esma:~ > /sbin/init.d/i4l_hardware start
Loading ISDN drivers ...
Loading HiSax driver ...
/sbin/insmod /lib/modules/2.2.10/net/slhc.o
/sbin/insmod /lib/modules/2.2.10/misc/isdn.o
/sbin/insmod /lib/modules/2.2.10/misc/hisax.o type=9 protocol=2 io=0x390 irq=11 id=ITK
HiSax: Kein passendes Gerät gefunden
Verbose-level set to 3.
Starting isdnlog with /etc/isdn/isdnlog.isdnctrl0.options for isdnctrl0...
root@esma:~ > isapnp /etc/isapnp.conf
Board 1 has Identity 6d ff ff ff ff f0 00 8c 0e: CTL00f0 Serial No -1 [checksum 6d]
Board 2 has Identity 96 c4 89 9b 0c 29 00 8b 26: ITK0029 Serial No 3297352460 [checksum 96]
CTL00f0/-1[0]{Audio }: IRQ5 --- Enabled OK
/etc/isapnp.conf:297 -- Fatal - resource conflict allocating IRQ11 (see /proc/interrupts)
/etc/isapnp.conf:297 -- Fatal - Error occurred executing request 'IRQ 11' --- further action aborted
root@esma:~ > /sbin/init.d/i4l_hardware stop
Unloading ISDN drivers ...
root@esma:~ > isapnp /etc/isapnp.conf
Board 1 has Identity 6d ff ff ff ff f0 00 8c 0e: CTL00f0 Serial No -1 [checksum 6d]
Board 2 has Identity 96 c4 89 9b 0c 29 00 8b 26: ITK0029 Serial No 3297352460 [checksum 96]
CTL00f0/-1[0]{Audio }: IRQ5 --- Enabled OK
ITK0029/3297352460[0]{Columbus Card }: IRQ11 --- Enabled OK
root@esma:~ > /sbin/init.d/i4l start
root@esma:~ > isapnp /etc/isapnp.conf
Board 1 has Identity 6d ff ff ff ff f0 00 8c 0e: CTL00f0 Serial No -1 [checksum 6d]
Board 2 has Identity 96 c4 89 9b 0c 29 00 8b 26: ITK0029 Serial No 3297352460 [checksum 96]
CTL00f0/-1[0]{Audio }: IRQ5 --- Enabled OK
ITK0029/3297352460[0]{Columbus Card }: IRQ11 --- Enabled OK
root@esma:~ > /sbin/init.d/i4l_hardware start
Loading ISDN drivers ...
Loading HiSax driver ...
/sbin/insmod /lib/modules/2.2.10/net/slhc.o
/sbin/insmod /lib/modules/2.2.10/misc/isdn.o
/sbin/insmod /lib/modules/2.2.10/misc/hisax.o type=9 protocol=2 io=0x390 irq=11 id=ITK
HiSax: Kein passendes Gerät gefunden
Verbose-level set to 3.
Starting isdnlog with /etc/isdn/isdnlog.isdnctrl0.options for isdnctrl0...
Kann mir einer helfen? Biiiiiiiiittteeeee brauche dringend ein paar Tips! Ich kann die How-To´s zu SUSE und ISDN gar nicht mehr lesen weil ich fast blind bin... *schluchz...
danke mal im
Voraus
-=OeKo=-
ich hab da ein kleines Problem was mir ordentlich zu schaffen macht. So langsam glaube ich das ich so richtig "meschugge" bin http://www.linuxforen.de/ubb/smile.gif
Die Fakten:
Habe Suse 6.2 installiert
ISDN von ITK Columbus World / ISA Steckplatz
laut meinen Ermittlungen:
IRQ=11
Port=0x390
ISAC=0x6000
HSCX=0x6040
das Ding will ich installieren aber immer wieder Fehlermeldungen ohne Ende, anbei ein paar Daten aus meiner /var/messages:
Oct 20 10:10:51 esma kernel: CSLIP: code copyright 1989 Regents of the Universit
Oct 20 10:10:51 esma kernel: ISDN subsystem Rev: 1.83/1.68/1.88/1.49/1.14/1.2 l
Oct 20 10:10:51 esma kernel: HiSax: Linux Driver for passive ISDN cards
Oct 20 10:10:51 esma kernel: HiSax: Version 3.2a (module)
Oct 20 10:10:51 esma kernel: HiSax: Layer1 Revision 2.34
Oct 20 10:10:51 esma kernel: HiSax: Layer2 Revision 2.17
Oct 20 10:10:51 esma kernel: HiSax: TeiMgr Revision 2.12
Oct 20 10:10:51 esma kernel: HiSax: Layer3 Revision 2.9
Oct 20 10:10:51 esma kernel: HiSax: LinkLayer Revision 2.29
Oct 20 10:10:51 esma kernel: HiSax: Approval certification failed because of
Oct 20 10:10:51 esma kernel: HiSax: unauthorized source code changes
Oct 20 10:10:51 esma kernel: HiSax: Total 1 card defined
Oct 20 10:10:51 esma kernel: HiSax: Card 1 Protocol EDSS1 Id=ITK (0)
Oct 20 10:10:51 esma kernel: HiSax: ITK IX1 driver Rev. 2.8
Oct 20 10:10:51 esma kernel: HiSax: ITK ix1-micro Rev.2 config irq:11 io:0x390
Oct 20 10:10:51 esma kernel: ix1-Micro: ISAC version (0): 2086/2186 V1.1
Oct 20 10:10:51 esma kernel: ix1-Micro: HSCX version A: V2.1 B: V2.1
Oct 20 10:10:51 esma kernel: ITK ix1-micro Rev.2: IRQ 11 count 67
Oct 20 10:10:51 esma kernel: ITK ix1-micro Rev.2: IRQ 11 count 72
Oct 20 10:10:51 esma kernel: HiSax: DSS1 Rev. 2.14
Oct 20 10:10:51 esma kernel: HiSax: 2 channels added
Oct 20 10:10:51 esma kernel: HiSax: MAX_WAITING_CALLS added
Oct 20 10:10:51 esma kernel: isdn: Verbose-Level is 3
Oct 20 10:10:51 esma isdnlog: isdnlog Version 3.41 starting
Oct 20 10:10:51 esma isdnlog: Warning: no holiday database specified!
Oct 20 10:10:51 esma isdnlog: Warning: no country database specified!
Oct 20 10:10:51 esma isdnlog: Warning: no rate database specified!
Oct 20 10:10:51 esma isdnlog: (ISDN subsystem with ISDN_MAX_CHANNELS > 16 detect
Oct 20 10:10:51 esma isdnlog: (Data versions: iprofd=0x05 net_cfg=0x05 /dev/is
und dann noch was ich so in der Konsole alles fabriziere:
root@esma:~ > isapnp /etc/isapnp.conf
Board 1 has Identity 6d ff ff ff ff f0 00 8c 0e: CTL00f0 Serial No -1 [checksum 6d]
Board 2 has Identity 96 c4 89 9b 0c 29 00 8b 26: ITK0029 Serial No 3297352460 [checksum 96]
CTL00f0/-1[0]{Audio }: IRQ5 --- Enabled OK
ITK0029/3297352460[0]{Columbus Card }: IRQ11 --- Enabled OK
root@esma:~ > /sbin/init.d/i4l_hardware start
Loading ISDN drivers ...
Loading HiSax driver ...
/sbin/insmod /lib/modules/2.2.10/net/slhc.o
/sbin/insmod /lib/modules/2.2.10/misc/isdn.o
/sbin/insmod /lib/modules/2.2.10/misc/hisax.o type=9 protocol=2 io=0x390 irq=11 id=ITK
HiSax: Kein passendes Gerät gefunden
Verbose-level set to 3.
Starting isdnlog with /etc/isdn/isdnlog.isdnctrl0.options for isdnctrl0...
root@esma:~ > isapnp /etc/isapnp.conf
Board 1 has Identity 6d ff ff ff ff f0 00 8c 0e: CTL00f0 Serial No -1 [checksum 6d]
Board 2 has Identity 96 c4 89 9b 0c 29 00 8b 26: ITK0029 Serial No 3297352460 [checksum 96]
CTL00f0/-1[0]{Audio }: IRQ5 --- Enabled OK
/etc/isapnp.conf:297 -- Fatal - resource conflict allocating IRQ11 (see /proc/interrupts)
/etc/isapnp.conf:297 -- Fatal - Error occurred executing request 'IRQ 11' --- further action aborted
root@esma:~ > /sbin/init.d/i4l_hardware stop
Unloading ISDN drivers ...
root@esma:~ > isapnp /etc/isapnp.conf
Board 1 has Identity 6d ff ff ff ff f0 00 8c 0e: CTL00f0 Serial No -1 [checksum 6d]
Board 2 has Identity 96 c4 89 9b 0c 29 00 8b 26: ITK0029 Serial No 3297352460 [checksum 96]
CTL00f0/-1[0]{Audio }: IRQ5 --- Enabled OK
ITK0029/3297352460[0]{Columbus Card }: IRQ11 --- Enabled OK
root@esma:~ > /sbin/init.d/i4l start
root@esma:~ > isapnp /etc/isapnp.conf
Board 1 has Identity 6d ff ff ff ff f0 00 8c 0e: CTL00f0 Serial No -1 [checksum 6d]
Board 2 has Identity 96 c4 89 9b 0c 29 00 8b 26: ITK0029 Serial No 3297352460 [checksum 96]
CTL00f0/-1[0]{Audio }: IRQ5 --- Enabled OK
ITK0029/3297352460[0]{Columbus Card }: IRQ11 --- Enabled OK
root@esma:~ > /sbin/init.d/i4l_hardware start
Loading ISDN drivers ...
Loading HiSax driver ...
/sbin/insmod /lib/modules/2.2.10/net/slhc.o
/sbin/insmod /lib/modules/2.2.10/misc/isdn.o
/sbin/insmod /lib/modules/2.2.10/misc/hisax.o type=9 protocol=2 io=0x390 irq=11 id=ITK
HiSax: Kein passendes Gerät gefunden
Verbose-level set to 3.
Starting isdnlog with /etc/isdn/isdnlog.isdnctrl0.options for isdnctrl0...
Kann mir einer helfen? Biiiiiiiiittteeeee brauche dringend ein paar Tips! Ich kann die How-To´s zu SUSE und ISDN gar nicht mehr lesen weil ich fast blind bin... *schluchz...
danke mal im
Voraus
-=OeKo=-