PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : ISDN Verbind geht einfach nicht


12.05.00, 14:38
Hallo, nach 7 Tagen rumtesten und installieren etc. versuch ich jetzt mal
hier mein Glück. Vielleicht erbarmt sich ja jemand und kann mir helfen.

Ich habe ein AVM FritzCard PnP (ISA) auf Suse 6.4 eingerichten, diese ist laut
startvorgang (yast) auch richtig eingerichtet. (Interrupt 5 / Port 160). Der Yast gibt mir zumindest keine Fehlermeldung und sagt mir das i4l richtig
gestartet wird.

Den Nameserver und die ISDN Verbindung habe ich ebenfalls eingerichtet.

So, nun starte ich kisdn und versuche mich einzuwählen. Die Nummer wird nach
den logfiles zu urteilen auch gewählt. Allerding kommt einfach keine
Verbindung zustande. Kann mir jemand helfen und mir sagen wie ich endlich
über Linux in das internet komme. Ich will endlich meinen ****** Windoof
Rechner wegschmeisen können.

Danke im voraus,
Neil Baker

13.05.00, 15:48
Folgende Schritte habe ich bisher unternommen:
ISDN Karte einrichten (wird erkannt und funktioniert)
ISDN Paramenter einrichten (auch hier scheinbar keine Fehler)

Über die Kaonsole habe ich verucht eine ISDN Verbindung aufzubauen:

linux:~ # rci4l_hardware start
Loading ISDN drivers ...
Loading HiSax driver ...
Starting isdnlog with /etc/isdn/isdnlog.isdnctrl0.options for isdnctrl0...
linux:~ # rci4l start
Starting isdn4linux on device ippp0
ippp0 added
EAZ/MSN for ippp0 is 202857
Layer-2-Protocol for ippp0 is hdlc
Layer-3-Protocol for ippp0 is trans
Encapsulation for ippp0 is syncppp
Security for ippp0 is on
Hangup-Timeout for ippp0 is 60 sec.
Charge-Hangup for ippp0 is off
Incoming-Hangup for ippp0 is off
Dialmax for ippp0 is 2 times.
Callback for ippp0 is off
Callback delay for ippp0 is 1 sec.
Reject before Callback for ippp0 is on
Setting up network device ippp0
Starting ippp-daemon for ISDN device ippp0 with /etc/ppp/options.ippp0
ippp0 bound to 0

linux:~ # rcroute start
Setting up routing (using /etc/route.conf) done
linux:~ # kimon

Nun noch meine Inhalte aus der /var/log/massages:

is 0
May 13 15:03:39 linux su: (to root) root on /dev/pts/3
May 13 15:03:39 linux PAM-unix2[9547]: session started for user root,
service su
May 13 15:03:43 linux kernel: cdrom: open failed.
May 13 15:03:43 linux kernel: VFS: Disk change detected on device
ide1(22,64)
May 13 15:03:55 linux ipppd[9426]: Terminating on signal 15.
May 13 15:03:55 linux ipppd[9426]: closing fd 8 from unit 0
May 13 15:03:55 linux ipppd[9426]: link 0 closed , linkunit: 0
May 13 15:03:55 linux ipppd[9426]: Exit.
May 13 15:03:55 linux kernel: ippp_ccp: freeing reset data structure
c247a800
May 13 15:03:55 linux ipppd[9637]: Found 1 device: /dev/ippp0
May 13 15:03:55 linux ipppd[9642]: ipppd i2.2.11 (isdn4linux version of pppd
by MH) started
May 13 15:03:55 linux ipppd[9642]: init_unit: 0
May 13 15:03:55 linux kernel: ippp, open, slot: 0, minor: 0, state: 0000
May 13 15:03:55 linux kernel: ippp_ccp: allocated reset data structure
c247a800
May 13 15:03:55 linux ipppd[9642]: Connect[0]: /dev/ippp0, fd: 15
May 13 15:04:09 linux PAM-unix2[9547]: session finished for user root,
service su
May 13 15:05:14 linux kernel: ippp0: dialing 1 019107873...
May 13 15:05:22 linux kernel: ippp0: dialing 2 019107873...
May 13 15:05:30 linux kernel: isdn_net: local hangup ippp0
May 13 15:05:30 linux kernel: ippp0: Chargesum is 0
May 13 15:08:03 linux ipppd[9642]: Terminating on signal 15.
May 13 15:08:03 linux ipppd[9642]: closing fd 15 from unit 0
May 13 15:08:03 linux ipppd[9642]: link 0 closed , linkunit: 0
May 13 15:08:03 linux ipppd[9642]: Exit.
May 13 15:08:03 linux kernel: ippp_ccp: freeing reset data structure
c247a800
May 13 15:08:19 linux kernel: HiSax: debugging flags card 1 set to 0
May 13 15:08:19 linux isdnlog: isdnlog Version 4.12 starting
May 13 15:08:19 linux isdnlog: Another isdnlog is running with pid 9429!
May 13 15:08:19 linux isdnlog: If not delete the file
`/var/run/isdnlog.isdnctrl0.pid' and try it again!
May 13 15:08:19 linux isdnlog: exit now 37
May 13 15:08:19 linux isdnlog: This is not my lock file
`/var/run/isdnlog.isdnctrl0.pid': Has PID 9429!
May 13 15:08:19 linux isdnlog: This is not my lock file
`/var/lock/LCK..isdnctrl0': Has PID 9429!
May 13 15:08:24 linux ipppd[9705]: Found 1 device: /dev/ippp0
May 13 15:08:24 linux ipppd[9707]: ipppd i2.2.11 (isdn4linux version of pppd
by MH) started
May 13 15:08:24 linux ipppd[9707]: init_unit: 0
May 13 15:08:24 linux kernel: ippp, open, slot: 0, minor: 0, state: 0000
May 13 15:08:24 linux kernel: ippp_ccp: allocated reset data structure
c646d800
May 13 15:08:24 linux ipppd[9707]: Connect[0]: /dev/ippp0, fd: 8
May 13 15:10:04 linux kernel: ippp0: dialing 1 019107873...
May 13 15:10:12 linux kernel: ippp0: dialing 2 019107873...

Kann mir jetzt jemand bei diesem Problem helfen? Ich bekomme die Verbindung
einfach nicht hin.

Vielen Dank im voraus, Neil Baker

Rot
15.05.00, 10:26
Hi Neil,
warum startest du die ISDN-Karte ein zweites
Mal ? Laut Logfile wird die Karte schon über die rc.config angstartet.

MfG
ROT