isaac
03.02.03, 20:55
Hallo
Ich habe einmal grafik on bord (sis 630 chip) und dann habe ich mir eine geforce 2 gekauft und eingebaut.
Nun möchte ich aber 2 Monitore laufen lassen hat jemand wie man dieses anstellen könnte?
Ich habe es schon geschafft das ich 2 oder 3 X server starten kann. Und ich kann auch mit den F-tasten problemlos umschalten. Doch der versuch eine section und sreen mit sis 630 zu starten ist fehlgeschlagen
fehler war
[root@localhost root]# X -screen VGA2 :2 -ac & sleep 2; DISPLAY=:2 startx
[1] 2729
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.17-0.13smp i686 [ELF]
Build Host: daffy.perf.redhat.com
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.2.log", Time: Mon Feb 3 21:48:18 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(EE) No devices detected.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.2.log".
Please report problems to xfree86@xfree86.org.
[1]+ Exit 1 X -screen VGA2 :2 -ac
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
Please report problems to xfree86@xfree86.org.
und ich kann auch kein bus mehr finden der sis 630 heist nachdem ich die geforce reingestöpselt habe. hier mal die liste
[root@localhost X11]# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 2).
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xd8000000 [0xdbffffff].
Bus 0, device 0, function 1:
IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208).
Master Capable. Latency=16.
I/O at 0x4000 [0x400f].
Bus 0, device 1, function 0:
ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 0).
Bus 0, device 1, function 2:
USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 7).
IRQ 5.
Master Capable. Latency=32. Max Lat=80.
Non-prefetchable 32 bit memory at 0xdf006000 [0xdf006fff].
Bus 0, device 1, function 3:
USB Controller: Silicon Integrated Systems [SiS] 7001 (#2) (rev 7).
IRQ 5.
Master Capable. Latency=32. Max Lat=80.
Non-prefetchable 32 bit memory at 0xdf004000 [0xdf004fff].
Bus 0, device 1, function 4:
Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 2).
IRQ 9.
Master Capable. Latency=32. Min Gnt=2.Max Lat=24.
I/O at 0xd000 [0xd0ff].
Non-prefetchable 32 bit memory at 0xdf005000 [0xdf005fff].
Bus 0, device 2, function 0:
PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0).
Master Capable. No bursts. Min Gnt=14.
Bus 0, device 11, function 0:
Unknown mass storage controller: Promise Technology, Inc. 20268 (rev 2).
IRQ 11.
Master Capable. Latency=32. Min Gnt=4.Max Lat=18.
I/O at 0xd400 [0xd407].
I/O at 0xd800 [0xd803].
I/O at 0xdc00 [0xdc07].
I/O at 0xe000 [0xe003].
I/O at 0xe400 [0xe40f].
Non-prefetchable 32 bit memory at 0xdf000000 [0xdf003fff].
Bus 0, device 13, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 16).
IRQ 5.
Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
I/O at 0xe800 [0xe8ff].
Non-prefetchable 32 bit memory at 0xdf007000 [0xdf0070ff].
Bus 1, device 0, function 0:
VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) (rev 178).
IRQ 3.
Master Capable. Latency=248. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xdc000000 [0xdcffffff].
Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
ich kann nur noch bus 1,0,0 finden der nach grafik aussieht. Ist das vielleicht das Problem?
ich habe auch mal die config mitgeschickt vielleicht weis ja jemand weiter
danke isaac:confused:
Ich habe einmal grafik on bord (sis 630 chip) und dann habe ich mir eine geforce 2 gekauft und eingebaut.
Nun möchte ich aber 2 Monitore laufen lassen hat jemand wie man dieses anstellen könnte?
Ich habe es schon geschafft das ich 2 oder 3 X server starten kann. Und ich kann auch mit den F-tasten problemlos umschalten. Doch der versuch eine section und sreen mit sis 630 zu starten ist fehlgeschlagen
fehler war
[root@localhost root]# X -screen VGA2 :2 -ac & sleep 2; DISPLAY=:2 startx
[1] 2729
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.17-0.13smp i686 [ELF]
Build Host: daffy.perf.redhat.com
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.2.log", Time: Mon Feb 3 21:48:18 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(EE) No devices detected.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.2.log".
Please report problems to xfree86@xfree86.org.
[1]+ Exit 1 X -screen VGA2 :2 -ac
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
Please report problems to xfree86@xfree86.org.
und ich kann auch kein bus mehr finden der sis 630 heist nachdem ich die geforce reingestöpselt habe. hier mal die liste
[root@localhost X11]# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 2).
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xd8000000 [0xdbffffff].
Bus 0, device 0, function 1:
IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208).
Master Capable. Latency=16.
I/O at 0x4000 [0x400f].
Bus 0, device 1, function 0:
ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 0).
Bus 0, device 1, function 2:
USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 7).
IRQ 5.
Master Capable. Latency=32. Max Lat=80.
Non-prefetchable 32 bit memory at 0xdf006000 [0xdf006fff].
Bus 0, device 1, function 3:
USB Controller: Silicon Integrated Systems [SiS] 7001 (#2) (rev 7).
IRQ 5.
Master Capable. Latency=32. Max Lat=80.
Non-prefetchable 32 bit memory at 0xdf004000 [0xdf004fff].
Bus 0, device 1, function 4:
Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 2).
IRQ 9.
Master Capable. Latency=32. Min Gnt=2.Max Lat=24.
I/O at 0xd000 [0xd0ff].
Non-prefetchable 32 bit memory at 0xdf005000 [0xdf005fff].
Bus 0, device 2, function 0:
PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0).
Master Capable. No bursts. Min Gnt=14.
Bus 0, device 11, function 0:
Unknown mass storage controller: Promise Technology, Inc. 20268 (rev 2).
IRQ 11.
Master Capable. Latency=32. Min Gnt=4.Max Lat=18.
I/O at 0xd400 [0xd407].
I/O at 0xd800 [0xd803].
I/O at 0xdc00 [0xdc07].
I/O at 0xe000 [0xe003].
I/O at 0xe400 [0xe40f].
Non-prefetchable 32 bit memory at 0xdf000000 [0xdf003fff].
Bus 0, device 13, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 16).
IRQ 5.
Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
I/O at 0xe800 [0xe8ff].
Non-prefetchable 32 bit memory at 0xdf007000 [0xdf0070ff].
Bus 1, device 0, function 0:
VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) (rev 178).
IRQ 3.
Master Capable. Latency=248. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xdc000000 [0xdcffffff].
Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
ich kann nur noch bus 1,0,0 finden der nach grafik aussieht. Ist das vielleicht das Problem?
ich habe auch mal die config mitgeschickt vielleicht weis ja jemand weiter
danke isaac:confused: