stefan-tiger
30.01.03, 13:17
Hallo,
Ich habe MDK9 und einen IDE Teac 4x4x32x CD-RW Brenner.
Meine Rohlinge sind alle Platinum CD-R 700 MB 80 min.
Ich habe mir das iso-Image von Gentoo Linux 1.4 heruntergeladen
md5sum gecgheckt und versuche es nun mit xcdroast zu brennen.
Einen Rohling habe ich schon kaputt gemacht, jetzt habe ich es nochmals versucht, mit vorheriger Simulation.
Schon bei der Simulation kam der Fehler. Leider hab ich überhaupt keine Ahnung wie ich diese "Fehler" beheben kann.
Unter Windows kann ich mit diesem Brenner und diesen Rohlingen ohne Probleme brennen.
Danke für jede Hilfe.
Gruß
hier der log von xcdroast:
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,2,0" fs=2048k -v -useinfo speed=4 -dao -dummy -eject -pad -data "/home/stefan/iso-images/gentoo-grp-i586-1.4_rc2.iso" ...
pregap1: -1
scsidev: '0,2,0'
Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
scsibus: 0 target: 2 lun: 0
TOC Type: 1 = CD-ROM
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'TEAC '
Identifikation : 'CD-W54E '
Revision : '1.1B'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1300480 = 1270 KB
FIFO size : 2097152 = 2048 KB
Track 01: data 497 MB padsize: 30 KB
Total size: 570 MB (56:33.90) = 254543 sectors
Lout start: 571 MB (56:35/68) = 254543 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 105305
Starting to write CD/DVD at speed 4 in dummy SAO mode for single session.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ...
input buffer ready.
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 03 A3 93 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 488413184 bytes
Writing time: 842.000s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
cdrecord: Input/output error. flush cache: scsi sendcmd: no error
Trouble flushing the cache
CDB: 35 00 00 00 00 00 00 00 00 00
Fixating time: 7.803s
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 7.803s timeout 200s
Average write speed 4.0x.
cdrecord: fifo had 7725 puts and 7694 gets.
Min drive buffer fill was 99%
cdrecord: fifo was 9 times empty and 7630 times full, min fill was 0%.
Ich habe MDK9 und einen IDE Teac 4x4x32x CD-RW Brenner.
Meine Rohlinge sind alle Platinum CD-R 700 MB 80 min.
Ich habe mir das iso-Image von Gentoo Linux 1.4 heruntergeladen
md5sum gecgheckt und versuche es nun mit xcdroast zu brennen.
Einen Rohling habe ich schon kaputt gemacht, jetzt habe ich es nochmals versucht, mit vorheriger Simulation.
Schon bei der Simulation kam der Fehler. Leider hab ich überhaupt keine Ahnung wie ich diese "Fehler" beheben kann.
Unter Windows kann ich mit diesem Brenner und diesen Rohlingen ohne Probleme brennen.
Danke für jede Hilfe.
Gruß
hier der log von xcdroast:
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,2,0" fs=2048k -v -useinfo speed=4 -dao -dummy -eject -pad -data "/home/stefan/iso-images/gentoo-grp-i586-1.4_rc2.iso" ...
pregap1: -1
scsidev: '0,2,0'
Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
scsibus: 0 target: 2 lun: 0
TOC Type: 1 = CD-ROM
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'TEAC '
Identifikation : 'CD-W54E '
Revision : '1.1B'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1300480 = 1270 KB
FIFO size : 2097152 = 2048 KB
Track 01: data 497 MB padsize: 30 KB
Total size: 570 MB (56:33.90) = 254543 sectors
Lout start: 571 MB (56:35/68) = 254543 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 105305
Starting to write CD/DVD at speed 4 in dummy SAO mode for single session.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ...
input buffer ready.
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 03 A3 93 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 488413184 bytes
Writing time: 842.000s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
cdrecord: Input/output error. flush cache: scsi sendcmd: no error
Trouble flushing the cache
CDB: 35 00 00 00 00 00 00 00 00 00
Fixating time: 7.803s
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 7.803s timeout 200s
Average write speed 4.0x.
cdrecord: fifo had 7725 puts and 7694 gets.
Min drive buffer fill was 99%
cdrecord: fifo was 9 times empty and 7630 times full, min fill was 0%.