phoenix22
19.11.02, 01:32
Hallo, ich habe nach viel hin und her geschafft ALSA unter Redhat 8 zu installieren, aber als ich das Ganze nun mit dem ALSA-XMMS testen wollte, hörte ich leider gar nix. Ich habe keine Ahnung woran das liegen könnte, hier eine Liste der geladenen Module:
[root@localhost root]# lsmod
Module Size Used by Not tainted
nls_iso8859-1 3516 1 (autoclean)
nls_cp437 5148 1 (autoclean)
vfat 13084 1 (autoclean)
fat 38712 0 (autoclean) [vfat]
sr_mod 18168 0 (autoclean)
snd-pcm-oss 44420 1 (autoclean)
snd-mixer-oss 15480 0 (autoclean) [snd-pcm-oss]
snd-intel8x0 23648 1 (autoclean)
snd-pcm 83328 0 (autoclean) [snd-pcm-oss snd-intel8x0]
snd-timer 15304 0 (autoclean) [snd-pcm]
snd-ac97-codec 36100 0 (autoclean) [snd-intel8x0]
snd-mpu401-uart 4812 0 (autoclean) [snd-intel8x0]
snd-rawmidi 18400 0 (autoclean) [snd-mpu401-uart]
snd-seq-device 6176 0 (autoclean) [snd-rawmidi]
snd 39404 0 (autoclean) [snd-pcm-oss snd-mixer-oss snd-int
el8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-devic
e]
soundcore 6532 3 (autoclean) [snd]
autofs 13348 0 (autoclean) (unused)
ppp_synctty 7936 0 (unused)
ppp_async 9440 1
ppp_generic 24380 3 [ppp_synctty ppp_async]
slhc 6756 0 [ppp_generic]
8139too 17704 1
mii 2156 0 [8139too]
iptable_filter 2412 0 (autoclean) (unused)
ip_tables 14936 1 [iptable_filter]
ide-scsi 10512 0
scsi_mod 107240 2 [sr_mod ide-scsi]
ide-cd 33608 0
cdrom 33696 0 [sr_mod ide-cd]
scanner 10420 0 (unused)
printer 8992 0
mousedev 5524 1
keybdev 2976 0 (unused)
hid 22244 0 (unused)
input 5920 0 [mousedev keybdev hid]
usb-uhci 26188 0 (unused)
usbcore 77024 1 [scanner printer hid usb-uhci]
ext3 70368 1
jbd 52212 1 [ext3]
Meine modules.conf sieht folgendermaßen aus:
alias parport_lowlevel parport_pc
alias eth0 8139too
alias char-major-81 bttv
alias usb-controller usb-uhci
# ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-intel8x0
#module options should go here
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
# card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
Ich habe meiner Meinung alles so gemacht, wie es in verschiedenen Anleitungen beschrieben wird. Achja, ich habe natürlich auch die Lautstärke hochgesetzt, daran liegts also auch nicht. Was kann ich noch tun?
[root@localhost root]# lsmod
Module Size Used by Not tainted
nls_iso8859-1 3516 1 (autoclean)
nls_cp437 5148 1 (autoclean)
vfat 13084 1 (autoclean)
fat 38712 0 (autoclean) [vfat]
sr_mod 18168 0 (autoclean)
snd-pcm-oss 44420 1 (autoclean)
snd-mixer-oss 15480 0 (autoclean) [snd-pcm-oss]
snd-intel8x0 23648 1 (autoclean)
snd-pcm 83328 0 (autoclean) [snd-pcm-oss snd-intel8x0]
snd-timer 15304 0 (autoclean) [snd-pcm]
snd-ac97-codec 36100 0 (autoclean) [snd-intel8x0]
snd-mpu401-uart 4812 0 (autoclean) [snd-intel8x0]
snd-rawmidi 18400 0 (autoclean) [snd-mpu401-uart]
snd-seq-device 6176 0 (autoclean) [snd-rawmidi]
snd 39404 0 (autoclean) [snd-pcm-oss snd-mixer-oss snd-int
el8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-devic
e]
soundcore 6532 3 (autoclean) [snd]
autofs 13348 0 (autoclean) (unused)
ppp_synctty 7936 0 (unused)
ppp_async 9440 1
ppp_generic 24380 3 [ppp_synctty ppp_async]
slhc 6756 0 [ppp_generic]
8139too 17704 1
mii 2156 0 [8139too]
iptable_filter 2412 0 (autoclean) (unused)
ip_tables 14936 1 [iptable_filter]
ide-scsi 10512 0
scsi_mod 107240 2 [sr_mod ide-scsi]
ide-cd 33608 0
cdrom 33696 0 [sr_mod ide-cd]
scanner 10420 0 (unused)
printer 8992 0
mousedev 5524 1
keybdev 2976 0 (unused)
hid 22244 0 (unused)
input 5920 0 [mousedev keybdev hid]
usb-uhci 26188 0 (unused)
usbcore 77024 1 [scanner printer hid usb-uhci]
ext3 70368 1
jbd 52212 1 [ext3]
Meine modules.conf sieht folgendermaßen aus:
alias parport_lowlevel parport_pc
alias eth0 8139too
alias char-major-81 bttv
alias usb-controller usb-uhci
# ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-intel8x0
#module options should go here
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
# card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
Ich habe meiner Meinung alles so gemacht, wie es in verschiedenen Anleitungen beschrieben wird. Achja, ich habe natürlich auch die Lautstärke hochgesetzt, daran liegts also auch nicht. Was kann ich noch tun?