PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : ATI Radeon unter XFree 4.1.0 mit Slack8 (Kernel 2.4.5)


dexterfilmore
05.10.01, 00:03
Aktueller stand der Dinge:

wie gesagt Slackware 8.0, 2.4.5, XF4.1.0
Monitor: 17" Belinea über BNC (kann also wahrscheinlich nicht geprobed werden)

X geht mal, mal wieder nicht, ich weiss nicht, warum. Ich habe eine config mit
XFree86 -configure
erstellt, die funktioniert nicht (Monitor geht in StandBy, Ende, kein strg-alt-bs weil X sich das Keyboard untern Nagel reisst und abschmiert)
Finde öfter mal den EE: "no screens found", aber auch andere.
Kann mir irgendwer verraten, wie man die Karte korrekt konfiguriert?
Vielleicht wer seine XF86config mailen oder posten, der die Karte auch hat?
(Dexter.Filmore@gmx.de)
Was gebe ich als Driver an? ati oder radeon?
Wo finde ich online doku? XFree86.org und linuxdocs.com hab ich schon durch, erfolglos.

boxi
05.10.01, 13:15
Hallo,
Ich hatte ein ähnliches Problem wie Du, mit dem Monitor, der in Standby schaltet. Vielleicht kannst du ja hiermit was anfangen:
http://www.linuxforen.de/cgibin/ubb/ultimatebb.cgi?ubb=get_topic&f=3&t=000556&p=2

Als Treiber mußt d uauf jeden Fall radeon angeben. Hier meine derzeitige XF86Config-4:


Section "Files"

RgbPath "/usr/X11R6/lib/X11/rgb"

FontPath "unix/:-1"

EndSection

# ************************************************** ********************
# Server flags section.
# ************************************************** ********************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom

# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail

EndSection

# ************************************************** ********************
# Input devices
# ************************************************** ********************

# ************************************************** ********************
# Keyboard section
# ************************************************** ********************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"

EndSection

# ************************************************** ********************
# Pointer section
# ************************************************** ********************

Section "InputDevice"

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection

Section "Module"

# This loads the DBE extension module.

Load "dbe"

Load "glx"
Load "dri"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection

# This loads the Type1 and FreeType font modules

Load "type1"
Load "freetype"
EndSection


Section "DRI"
Mode 0666
EndSection


# ************************************************** ********************
# Monitor section
# ************************************************** ********************

# Any number of monitor sections may be present

Section "Monitor"
Identifier "monitor1"
VendorName "Unknown"
ModelName "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-88


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 47-130


EndSection

# ************************************************** ********************
# Graphics device section
# ************************************************** ********************

Section "Device"
Identifier "ATI Radeon"
VendorName "Unknown"
BoardName "Unknown"
Driver "radeon"
# VideoRam 65536
# Clock lines


# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"

Option "AGPMode" "1"
Option "DPMS" "on"
EndSection

# ************************************************** ********************
# Screen sections
# ************************************************** ********************


Section "Screen"
Identifier "screen1"
Device "ATI Radeon"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection


Section "ServerLayout"
Identifier "layout1"
Screen "screen1"

InputDevice "Mouse1" "CorePointer"

InputDevice "Keyboard1" "CoreKeyboard"
EndSection

dexterfilmore
06.10.01, 19:01
danke, werd sie mal vergleichen.

dexterfilmore
09.10.01, 19:28
Kein Erfolg nach optimieren. Auch up auf 2.4.10 brachte nix. Angeblich soll laut newsgroup forcen auf 8bpp helfen weil das Modul nen Bug hat, probier ich gleich erst aus.