sleon
15.11.01, 22:27
FRITZCARD PCI v2.0 unter RedHat 7.2(capiplugin.so Problem)
Ich habe alle treiber und module installiert und geladen.Die Karte wurde
richtig geladen. Aber es fehlt anscheinend noch etwas.
Sieht selbst:
-----------------------------------------------
[root@ro sleon]# /sbin/capiinit start
1 fcpci running fritz-pci A1 3.09-10 0xA400 5
[root@ro sleon]# /usr/sbin/pppd call talk
Warning: plugin /etc/ppp/plugins/userpass.so has no version information
Plugin /etc/ppp/plugins/userpass.so loaded.
Warning: plugin /etc/ppp/plugins/capiplugin.so has no version information
Plugin /etc/ppp/plugins/capiplugin.so loaded.
capiplugin: $Revision: 1.11 $
capiconn: 1.5
/usr/sbin/pppd: In file /etc/ppp/peers/talk: unrecognized option 'msn'
----------------------------------------------------------------
Obwohl unter SuSE 7.1 alles funktioniert:
--------------------------------------------------------------
1 fcpci running fritz-pci A1 3.09-10 0xA400 5
Plugin /etc/ppp/plugins/userpass.so loaded.
Plugin /etc/ppp/plugins/capiplugin.so loaded.
capiplugin: $Revision: 1.13 $
capiconn: 1.5
capiplugin: phase serialconn
capiplugin: contr=1
controller 1: listen_change_state 0 -> 1
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144
cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
plci_change_state:0x0 0 -> 1 event=1
capiplugin: dial 019251 (hdlc)
plci_change_state:0x101 1 -> 2 event=3
plci_change_state:0x101 2 -> 3 event=6
ncci_change_state:0x101 0 -> 1 event=1
ncci_change_state:0x10101 1 -> 3 event=3
ncci_change_state:0x10101 3 -> 4 event=7
ncci 0x10101 up
capiplugin: connected: "6743781" -> "019251" outgoing
(pcli=0x101/ncci=0x10101) capiplugin: using /dev/capi/0: "6743781" ->
"019251"
outgoing (pcli=0x101/ncci=0x10101)
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/capi/0
sent [LCP ConfReq id=0x1 ]
capiplugin: phase establish
rcvd [LCP ConfReq id=0xb6
[local:54.61.6c.6b.6c.69.6e.65.2d.73.74.67]>]
sent [LCP ConfRej id=0xb6 ]
rcvd [LCP ConfAck id=0x1 ]
rcvd [LCP ConfReq id=0xb7 [local:54.61.6c.6b.6c.69.6e.65.2d.73.74.67]>]
sent [LCP ConfAck id=0xb7 [local:54.61.6c.6b.6c.69.6e.65.2d.73.74.67]>]
sent [LCP EchoReq id=0x0 magic=0xcc657c6a]
capiplugin: phase authenticate
sent [PAP AuthReq id=0x1 user="8qwod5y3" password=]
rcvd [LCP EchoRep id=0x0 magic=0x7930ed37]
rcvd [PAP AuthAck id=0x1 ""]
capiplugin: phase network
sent [IPCP ConfReq id=0x1 0.0.0.0> ]
sent [CCP ConfReq id=0x1 ]
rcvd [IPCP ConfReq id=0x1 ]
sent [IPCP ConfAck id=0x1 ]
rcvd [CCP ConfReq id=0x1 < 17 06 00 01 02 01>]
sent [CCP ConfRej id=0x1 < 17 06 00 01 02 01>]
rcvd [IPCP ConfRej id=0x1 ]
sent [IPCP ConfReq id=0x2 0.0.0.0>]
rcvd [CCP ConfRej id=0x1 ]
sent [CCP ConfReq id=0x2]
rcvd [CCP ConfReq id=0x2 < 11 05 00 01 01>]
sent [CCP ConfRej id=0x2 < 11 05 00 01 01>]
rcvd [IPCP ConfNak id=0x2
]
sent [IPCP ConfReq id=0x3
]
rcvd [CCP ConfAck id=0x2]
rcvd [CCP ConfReq id=0x3 < 11 05 00 01 03>]
sent [CCP ConfRej id=0x3 < 11 05 00 01 03>]
rcvd [IPCP ConfAck id=0x3
]
local IP address 195.252.191.211
remote IP address 195.252.184.46
primary DNS address 195.252.128.53
secondary DNS address 195.252.143.26
capiplugin: phase running
Script /etc/ppp/ip-up started (pid 967)
rcvd [CCP ConfReq id=0x4 < 12 06 00 00 00 01>]
sent [CCP ConfRej id=0x4 < 12 06 00 00 00 01>]
rcvd [CCP ConfReq id=0x5 ]
sent [CCP ConfRej id=0x5 ]
rcvd [CCP ConfReq id=0x6]
sent [CCP ConfAck id=0x6]
Script /etc/ppp/ip-up finished (pid 967), status = 0x0
----------------------------------------------------
Hier ist die Talk-datei(Provider-File[/etc/ppp/peers/talk]
-------------------------------------
debug
sync
noauth
plugin /etc/ppp/plugins/userpass.so
username balaba
password balabala
defaultroute
plugin /etc/ppp/plugins/capiplugin.so
#controller 1
#numberprefix 0
msn 6743781
number 019251
usepeerdns
protocol hdlc
/dev/null
(ich verwende eine und dasselbe Kernel (2.4.13) und selbe Module für
beide Distributionen(selbst kompiliert).
Auch die Versionen der i4l Packete sind bei RH7.2 und SuSE7.1 gleich.
Hat jemand eine Idee woran es liegen konnte?
Vielen dank im voraus für ihre Mühe!
sleon
__________________
Debian Linux 2.2
Duron 800
640MB
GeForce2 MX
15Zoll Monitor
Logitech Funkmaus und -Tastatur
AVM Fritz PCI V2.0 isdn Karte
Asus A7V Mainboard
Benutze Linux seit einem Jahr
Ich habe alle treiber und module installiert und geladen.Die Karte wurde
richtig geladen. Aber es fehlt anscheinend noch etwas.
Sieht selbst:
-----------------------------------------------
[root@ro sleon]# /sbin/capiinit start
1 fcpci running fritz-pci A1 3.09-10 0xA400 5
[root@ro sleon]# /usr/sbin/pppd call talk
Warning: plugin /etc/ppp/plugins/userpass.so has no version information
Plugin /etc/ppp/plugins/userpass.so loaded.
Warning: plugin /etc/ppp/plugins/capiplugin.so has no version information
Plugin /etc/ppp/plugins/capiplugin.so loaded.
capiplugin: $Revision: 1.11 $
capiconn: 1.5
/usr/sbin/pppd: In file /etc/ppp/peers/talk: unrecognized option 'msn'
----------------------------------------------------------------
Obwohl unter SuSE 7.1 alles funktioniert:
--------------------------------------------------------------
1 fcpci running fritz-pci A1 3.09-10 0xA400 5
Plugin /etc/ppp/plugins/userpass.so loaded.
Plugin /etc/ppp/plugins/capiplugin.so loaded.
capiplugin: $Revision: 1.13 $
capiconn: 1.5
capiplugin: phase serialconn
capiplugin: contr=1
controller 1: listen_change_state 0 -> 1
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144
cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
plci_change_state:0x0 0 -> 1 event=1
capiplugin: dial 019251 (hdlc)
plci_change_state:0x101 1 -> 2 event=3
plci_change_state:0x101 2 -> 3 event=6
ncci_change_state:0x101 0 -> 1 event=1
ncci_change_state:0x10101 1 -> 3 event=3
ncci_change_state:0x10101 3 -> 4 event=7
ncci 0x10101 up
capiplugin: connected: "6743781" -> "019251" outgoing
(pcli=0x101/ncci=0x10101) capiplugin: using /dev/capi/0: "6743781" ->
"019251"
outgoing (pcli=0x101/ncci=0x10101)
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/capi/0
sent [LCP ConfReq id=0x1 ]
capiplugin: phase establish
rcvd [LCP ConfReq id=0xb6
[local:54.61.6c.6b.6c.69.6e.65.2d.73.74.67]>]
sent [LCP ConfRej id=0xb6 ]
rcvd [LCP ConfAck id=0x1 ]
rcvd [LCP ConfReq id=0xb7 [local:54.61.6c.6b.6c.69.6e.65.2d.73.74.67]>]
sent [LCP ConfAck id=0xb7 [local:54.61.6c.6b.6c.69.6e.65.2d.73.74.67]>]
sent [LCP EchoReq id=0x0 magic=0xcc657c6a]
capiplugin: phase authenticate
sent [PAP AuthReq id=0x1 user="8qwod5y3" password=]
rcvd [LCP EchoRep id=0x0 magic=0x7930ed37]
rcvd [PAP AuthAck id=0x1 ""]
capiplugin: phase network
sent [IPCP ConfReq id=0x1 0.0.0.0> ]
sent [CCP ConfReq id=0x1 ]
rcvd [IPCP ConfReq id=0x1 ]
sent [IPCP ConfAck id=0x1 ]
rcvd [CCP ConfReq id=0x1 < 17 06 00 01 02 01>]
sent [CCP ConfRej id=0x1 < 17 06 00 01 02 01>]
rcvd [IPCP ConfRej id=0x1 ]
sent [IPCP ConfReq id=0x2 0.0.0.0>]
rcvd [CCP ConfRej id=0x1 ]
sent [CCP ConfReq id=0x2]
rcvd [CCP ConfReq id=0x2 < 11 05 00 01 01>]
sent [CCP ConfRej id=0x2 < 11 05 00 01 01>]
rcvd [IPCP ConfNak id=0x2
]
sent [IPCP ConfReq id=0x3
]
rcvd [CCP ConfAck id=0x2]
rcvd [CCP ConfReq id=0x3 < 11 05 00 01 03>]
sent [CCP ConfRej id=0x3 < 11 05 00 01 03>]
rcvd [IPCP ConfAck id=0x3
]
local IP address 195.252.191.211
remote IP address 195.252.184.46
primary DNS address 195.252.128.53
secondary DNS address 195.252.143.26
capiplugin: phase running
Script /etc/ppp/ip-up started (pid 967)
rcvd [CCP ConfReq id=0x4 < 12 06 00 00 00 01>]
sent [CCP ConfRej id=0x4 < 12 06 00 00 00 01>]
rcvd [CCP ConfReq id=0x5 ]
sent [CCP ConfRej id=0x5 ]
rcvd [CCP ConfReq id=0x6]
sent [CCP ConfAck id=0x6]
Script /etc/ppp/ip-up finished (pid 967), status = 0x0
----------------------------------------------------
Hier ist die Talk-datei(Provider-File[/etc/ppp/peers/talk]
-------------------------------------
debug
sync
noauth
plugin /etc/ppp/plugins/userpass.so
username balaba
password balabala
defaultroute
plugin /etc/ppp/plugins/capiplugin.so
#controller 1
#numberprefix 0
msn 6743781
number 019251
usepeerdns
protocol hdlc
/dev/null
(ich verwende eine und dasselbe Kernel (2.4.13) und selbe Module für
beide Distributionen(selbst kompiliert).
Auch die Versionen der i4l Packete sind bei RH7.2 und SuSE7.1 gleich.
Hat jemand eine Idee woran es liegen konnte?
Vielen dank im voraus für ihre Mühe!
sleon
__________________
Debian Linux 2.2
Duron 800
640MB
GeForce2 MX
15Zoll Monitor
Logitech Funkmaus und -Tastatur
AVM Fritz PCI V2.0 isdn Karte
Asus A7V Mainboard
Benutze Linux seit einem Jahr